The EtherPortXLR-M is a very compact Ethercon to 4x XLR Female BreakoutBox  (Sound: Intput, DMX Output)  for looping through.Ideal for extending or distributing four symmetrical audio signals via RJ45 as a multicore. e.g. stage microphone, delay speakers, DJ deck breakout, 1xEthercon In4 x  XLR Male 1:1 (Sound: Input, DMX Output)1x Ethercon through out

The EtherPortXLR-M is a very compact Ethercon to 4x XLR Female BreakoutBox  (Sound: Intput, DMX Output)  for looping through.Ideal for extending or distributing four symmetrical audio signals via RJ45 as a multicore. e.g. stage microphone, delay speakers, DJ deck breakout, 1xEthercon In4 x  XLR Male 1:1 (Sound: Input, DMX Output)1x Ethercon through out

The EtherPortXLR-M is a very compact Ethercon to 4x XLR Female BreakoutBox  (Sound: Intput, DMX Output)  for looping through.Ideal for extending or distributing four symmetrical audio signals via RJ45 as a multicore. e.g. stage microphone, delay speakers, DJ deck breakout, 1xEthercon In4 x  XLR Male 1:1 (Sound: Input, DMX Output)1x Ethercon through out

The EtherPortXLR-M is a very compact Ethercon to 4x XLR Female BreakoutBox  (Sound: Intput, DMX Output)  for looping through.Ideal for extending or distributing four symmetrical audio signals via RJ45 as a multicore. e.g. stage microphone, delay speakers, DJ deck breakout, 1xEthercon In4 x  XLR Male 1:1 (Sound: Input, DMX Output)1x Ethercon through out

The EtherPortXLR-M is a very compact Ethercon to 4x XLR Female BreakoutBox  (Sound: Intput, DMX Output)  for looping through.Ideal for extending or distributing four symmetrical audio signals via RJ45 as a multicore. e.g. stage microphone, delay speakers, DJ deck breakout, 1xEthercon In4 x  XLR Male 1:1 (Sound: Input, DMX Output)1x Ethercon through out

The EtherPortXLR-M is a very compact Ethercon to 4x XLR Female BreakoutBox  (Sound: Intput, DMX Output)  for looping through.Ideal for extending or distributing four symmetrical audio signals via RJ45 as a multicore. e.g. stage microphone, delay speakers, DJ deck breakout, 1xEthercon In4 x  XLR Male 1:1 (Sound: Input, DMX Output)1x Ethercon through out

The EtherPortXLR-M is a very compact Ethercon to 4x XLR Male BreakoutBox  (Sound: Output, DMX Input)  for looping through.Ideal for extending or distributing four symmetrical audio signals via RJ45 as a multicore. e.g. stage microphone, delay speakers, DJ deck breakout, 1xEthercon In4 x  XLR Male 1:1 (Sound: Output, DMX Input)1x Ethercon through out

RackPort-ES are over Ethernet switchable Relais per output

The RigPeater-MKII is a compact, powerful DMX512 2-line splitter for the traverse with 2 high-performance boosters for 2x "256" additional devices per line (traditionally 32 per port).Specific features:DMX512 BoosterCan be installed quickly and easily using RigPort ClampsCan be positioned variably in the traverseFood SignalSmart Devicesgalvanically isolated (In|Out1|Out2)Integrated wide-range power supply (90-264VAC)Connections:1x Powercon-T1-In1x XLR5-In2x XLR5-OutTechnical data:

The RigPeater3x3XLR is a compact, powerful DMX512 2-line splitter for the traverse with 2 high-performance boosters for 2x "256" additional devices per line (traditionally 32 per port).Specific features:DMX512 BoosterCan be installed quickly and easily using RigPort ClampsCan be positioned variably in the traverseFood SignalSmart Devicesgalvanically isolated (In|Out1|Out2)Integrated wide-range power supply (90-264VAC)Connections:1x Powercon-In1x XLR3-In2x XLR3-OutTechnical data:

The RigPort Clamp is a truss clamp (50mm) for quick fixation of the RigPort line. Two clamps are required per port.Attention: this is not a lifting device, which is why a secondary safety device may be required!not compatible with L1S4 line Technical data:

The RigSwitch8x is a managed 8-way Ethernet 1GBit distributor for the truss, suitable as a central star distribution for many devices in a confined space. Web managed (IP Address: 192.168.0.1 [admin/admin])1x Powercon-True1-In 1x Powercon-True1-Out 8x Ethercon-Out (with rubber protective cap) IP54 M10 screw mount for attaching couplers, trigger clamps, etc. 2xM4 receptacle for RPL clampsSupport--portbased QOS, quality of service, higher priority traffic experiences less delay than lower priority traffic under congested conditions -IEEE 802.1p Qos ,TOS/DSCP Qos -port trunking/aggregation -rate control, broadcast storm suppression -port flow control -port mirror -IGMP Snooping V1/V2, MLD snooping -IEEE802.1X based port security -loop detection, loop prevention -Dos attack prevention -configure port speed, status -SNMP,web GUI, CLI management -mac list,mac search SPECIFICATIONInterface8*10/100/1000Mbps RJ45 PortsAUTO Negotiation/AUTO MDI/MDIX Standards and ProtocolsIEEE 802.3, IEEE 802.3u, IEEE 802.3ab,IEEE 802.3x, IEEE 802.1q, IEEE 802.1p Network Media10BASE-T: UTP category 3, 4, 5 cable (maximum 100m)EIA/TIA-568 100Ω STP (maximum 100m)100BASE-TX: UTP category 5, 5e cable (maximum 100m)EIA/TIA-568 100Ω STP (maximum 100m)1000BASE-T: UTP category 5, 5e, 6 or above cable (maximum 100m)EIA/TIA-568 100Ω STP (maximum 100m)Power ConsumptionMaximum: 4.48W (220V/50Hz)PERFORMANCESwitching CapacityPacket Forwarding Rate16Gbps11.9MppsMAC Address Table4KPacket Buffer Memory1.5MbJumbo Frame15KB SOFTWARE FEATURESQuality of ServiceSupport Port-based/802.1p/DSCP prioritySupport 4 priority queuesRate LimitStorm ControlL2 FeaturesIGMP SnoopingSupports 128 GroupsSupports static link aggregationPort MirroringCable DiagnosticsLoop PreventionVLANSupports up to 32 VLANs simultaneously (out of 4K VLAN IDs)MTU/Port/Tag VLANTransmission MethodStore-And-Forward OTHERSSystem RequirementsMicrosoft® Windows® for running UtilityEnvironmentOperating Temperature: 0℃~40℃ (32℉~104℉)Storage Temperature: -40℃~70℃ (-40℉~158℉)Operating Humidity: 10%~90% non-condensingStorage Humidity: 5%~90% non-condensing

The SpeakPort is a very compact Speakon (NL4) breakout box ideal for extending or distributing many speakers, e.g. in PA applications.Specific features:subtle design, yet small and lightsafe and firm latchesDimensionally stable housing made of impact-resistant plasticCan be installed quickly and easily using RigPort Clamps (except L1S4 line)Can be positioned variably in the traverseeasy to combineRigPort Safety available for secondary backupConnections:1x Speakon-In2x Speakon- 1:1 Out1x Speakon-Through OutTechnical data:

The SpeakPort1x is a compact Speakon (NL4M) breakout box with 2 side outlets:1x 1:1 Out and 1x BiAmped Out (1+ - and 2+ - swapped, e.g. to swap top and bass channel amp)Specific features:subtle design, yet small and lightsafe and firm latchesDimensionally stable housing made of impact-resistant plasticCan be installed quickly and easily using RigPort Clamps (except L1S4 line)Can be positioned variably in the traverseideal for extending or distributing many loudspeakers, e.g. in PA applicationseasy to combineRigPort Safety available for secondary backupConnections:1x Speakon-In2x Speakon-Out1x Speakon-Through OutTechnical data:

Very compact Speakon (NL8M -->NL4M) BreakoutBox and SplitBox with 4 side outlets (1xNL8M -->2xNL4M Split)-->NL8M:Pair 1 & 2: 1x 1:1 Out and 1x BiAmped Out (1+ - and 2+ - swapped, e.g. to swap top and bass channel amp)-->NL8M:Pair 3 & 4: 1x 1:1 Out and 1x BiAmped Out (1+ - and 2+ - swapped, e.g. to swap top and bass channel amp)and an additional NL8M socket for looping.Specific features:subtle designvery stable metal housingsafe and firm latchesCan be positioned variably in the traverseenables fast cablingideal for extending or distributing many loudspeakers, e.g. in PA applicationseasy to combineRigPort Safety available for secondary backupConnections:1x SpeakonNL8M-In4x Speakon-Out1x SpeakonNL8M-Through Out Technical data: 

Very compact Speakon (NLT8 -->NLT4) BreakoutBox and SplitBox with 4 side outlets (1xNLT8M -->2xNTL4F Split)-->NLT8:Pair 1 & 2: 1x 1:1 Out and 1x BiAmped Out (1+ - and 2+ - swapped, e.g. to swap top and bass channel amp)-->NLT8:Pair 3 & 4: 1x 1:1 Out and 1x BiAmped Out (1+ - and 2+ - swapped, e.g. to swap top and bass channel amp)and an additional NLT8F socket for looping.Specific features:subtle designvery stable metal housingsafe and firm latchesCan be positioned variably in the traverseenables fast cablingideal for extending or distributing many loudspeakers, e.g. in PA applicationseasy to combineRigPort Safety available for secondary backupConnections:1x SpeakonNL8TM-In4x SpeakonNLT4-Out1x SpeakonNLT8M-Through OutTechnical data: