RigPortL1-T1

The RigPortL1-T1 is a BreakoutBox with Powercon True1 connections. new version, improved quality, new dimensionsSpecific features:subtle design, yet small and lightsafe and firm latchesDimensionally stable housing made of impact-resistant plasticCan be installed quickly and easily using RigPort ClampsCan be positioned variably in the traverseeasy to combineRigPort Safety available for secondary backupConnections:1x Powercon-T1-In2x Powercon-T1-Out1x Powercon-T1-Through OutTechnical data:

€60.81*

RigPortL1

The RigPortL1 is a breakout box with Powercon connections.Specific features:subtle design, yet small and lightsafe and firm latchesDimensionally stable housing made of impact-resistant plasticCan be installed quickly and easily using RigPort Clamps (except L1S4 line)Can be positioned variably in the traverseeasy to combineRigPort Safety available for secondary backupConnections:1x Powercon In2x Powercon out1x Powercon through outTechnical data:

€44.98*

RigPortL1S4-T1

The RigPortL1S4T1 is a breakout box with Powercon True1 connections and 4 side Schuko sockets.Specific features:Fixed, pre-assembled system based on RigPortHigh price savings compared to modular construction - up to 70%!Lower loop resistance due to the lowest number of plug connectionsgreatly reduced setup timesnot suitable for assembly with RigPort Clamps4 holes for fixed mountingRubber protective cap on the Powercon-T1-Outsuitable for outdoor useNot only suitable for event technology but also as a clean, unobtrusive and freely expandable power supply for offices or conference roomsConnections:1x Powercon-T1-In4x Schuko out1x Powercon-T1-Through OutTechnical data:

€78.30*

RigPortL1S2

The RigPortL1S2 is a breakout box with Powercon connections and two side Schuko sockets.Specific features:subtle design, yet small and lightsafe and firm latchesDimensionally stable housing made of impact-resistant plasticCan be installed quickly and easily using RigPort ClampsCan be positioned variably in the traverseeasy to combineRigPort Safety available for secondary backupConnections:1x Powercon-In2x Schuko out1x Powercon-Through OutTechnical data:

€59.98*

RigPortL1T1-PM

The RigPortL1T1PM is a simple Wi-Fi power monitor with voltage/current display with Powercon-True1 connections for looping into 1-phase Powercon-True1 supply lines.Specific features:40-400V/100A high precision digital meter voltmeter ammeterLCD screen with wide viewing angleswitchable backlightVoltage measurement range: 40-400VMeasuring accuracy: ± 1%Current measurement range: 0-100AStarting current: 0.02AMeasuring accuracy: ± 1%Wi-Fi measurement of current and voltageShelly Plus PM mini Connections:1x Powercon-T1-In NAC3MPX-TOP 1x Powercon-T1-Through Out NAC3FPX-TOPTechnical data:

€91.63*

RigPort8x

The Rigport8x is an 8-way Powercon distributor suitable as a central star distribution for many devices in a nearby area.Specific features:subtle designvery stable metal housingsafe and firm latchesCan be positioned variably in the traverseM10 screw mount for attaching couplers, trigger clamps or similar.enables fast cablingeasy to combineRigPort Safety available for secondary backupConnections:1x Powercon-In8x Powercon-Out1x Powercon-Through OutTechnical data:

€181.59*

RigPortL1S4

The RigPortL1S4 is a Powercon BreakoutBox with 4 side Schuko sockets.Specific features:Fixed, pre-assembled system based on RigPortHigh price savings compared to modular construction - up to 70%!Lower loop resistance due to the lowest number of plug connectionsgreatly reduced setup timesnot suitable for assembly with RigPort Clamps4 holes for fixed mountingNot only suitable for event technology but also as a clean, unobtrusive and freely expandable power supply for offices or conference roomsConnections:1x Powercon-In4x Schuko out1x Powercon-Through OutTechnical data:

€69.97*

RigportL1S4T1LED

The RigPortL1S4T1 is a breakout box with Powercon True1 connections and 4 side Schuko sockets with LED.Specific features:Fixed, pre-assembled system based on RigPortHigh price savings compared to modular construction - up to 70%!Lower loop resistance due to the lowest number of plug connectionsgreatly reduced setup timesnot suitable for assembly with RigPort Clamps4 holes for fixed mountingRubber protective cap on the Powercon-T1-Outsuitable for outdoor useNot only suitable for event technology but also as a clean, unobtrusive and freely expandable power supply for offices or conference roomsConnections:1x Powercon-T1-In4x Schuko out1x Powercon-T1-Through OutTechnical data:

€78.30*

RigPortL1S2T1

The RigPortL1S2T1 is a breakout box with Powercon True1 connections and two side Schuko sockets.Specific features:subtle design, yet small and lightsafe and firm latchesDimensionally stable housing made of impact-resistant plasticCan be installed quickly and easily using RigPort ClampsCan be positioned variably in the traverseeasy to combineRigPort Safety available for secondary backupConnections:1x Powercon-T1-In2x Schuko out1x Powercon-T1-Through OutTechnical data:

€64.97*

WatchDogL1

The WatchDogL1 is a smart Wi-Fi power monitor with online voltage/current measurement for looping into 1-phase Powercon supply lines.Specific features:two programmable 16 amp switching outputs (WatchDog function for limit values)Power measurement on each channelWeb server for monitoring and configurationWi-Fi, MQTT, Bluetooth...Performance measurement with data storageSmart schedules, scripting, webhooksShelly Plus 2PM Connections:1x Powercon-In NAC3MPXXA1x Powercon-Breakout NAC3MPXXB 1x Powercon-Through Out NAC3MPXXB Technical data:

€98.29*

RigPortL1S1T1

The RigPortL1S1T1 is a breakout box with Powercon True1 connections and a Schuko socket on the side.Specific features:subtle design, yet small and lightsafe and firm latchesDimensionally stable housing made of impact-resistant plasticCan be installed quickly and easily using RigPort ClampsCan be positioned variably in the traverseeasy to combineRigPort Safety available for secondary backupConnections:1x Powercon-T1-In1x Schuko out1x Powercon-T1-Through OutTechnical data:

€46.65*

WatchDogL1T1

The WatchDogL1T1 is a smart Wi-Fi power monitor with online voltage/current measurement for looping into 1-phase Powercon True1 supply lines.Specific features:two programmable 16 amp switching outputs (WatchDog function for limit values)Power measurement on each channelWeb server for monitoring and configurationWi-Fi, MQTT, Bluetooth...Performance measurement with data storageSmart schedules, scripting, webhooksWi-Fi, MQTT...Shelly Plus 1PMConnections:1x Powercon-T1-In NAC3MPX-TOP1x Powercon-T1-Through Out NAC3FPX-TOP Technical data:

€81.63*

RigPortL1-PM

The RigPortL1PM is a simple Wi-Fi power monitor with voltage/current display with Powercon connections for looping into 1-phase Powercon supply lines.Specific features:40-400V/100A high precision digital meter voltmeter ammeterLCD screen with wide viewing angleswitchable backlightVoltage measurement range: 40-400VMeasuring accuracy: ± 1%Current measurement range: 0-100AStarting current: 0.02AMeasuring accuracy: ± 1%Wi-Fi measurement of current and voltageShelly Plus PM mini Connections:1x Powercon-In NAC3MPXXA 1x Powercon-Through Out NAC3MPXXBTechnical data:

€84.97*

WatchDogL1S1T1

The WatchDogL1S1T1 is a smart Wi-Fi power monitor with online voltage/current measurement for looping into 1-phase Powercon True1 supply lines.Specific features:two programmable 16 amp switching outputs (WatchDog function for limit values)Power measurement on each channelWeb server for monitoring and configurationWi-Fi, MQTT, Bluetooth...Performance measurement with data storageSmart schedules, scripting, webhooksShelly Plus 2PMConnections:1x Powercon-T1-In NAC3MPXXA 1x Schuko breakout1x Powercon-T1-Through Out NAC3MPXXB Technical data:

€106.62*

RigPortL1-Mix

Product information “RigPortL1 Mix”The RigPortL1 mix is an adapter breakout box with Powercon bus and mix of 1xPowercon and 1x PowertconT1 breakout.Specific features:Adapter Powercon bus with 1x Powercon and 1x PowerconT1 breakoutsubtle design, yet small and lightsafe and firm latchesDimensionally stable housing made of impact-resistant plasticCan be installed quickly and easily using RigPort Clamps (except L1S4 line)Can be positioned variably in the traverseeasy to combineRigPort Safety available for secondary backupConnections:1x Powercon In1x Powercon True1Out1x Powercon Out1x Powercon through outTechnical data:

€59.98*

RigPortL1S1

The RigPortL1S1 is a Powercon BreakoutBox with a Schuko socket on the side.Specific features:subtle design, yet small and lightsafe and firm latchesDimensionally stable housing made of impact-resistant plasticCan be installed quickly and easily using RigPort ClampsCan be positioned variably in the traverseeasy to combineRigPort Safety available for secondary backupConnections:1x Powercon-In1x Schuko out1x Powercon-Through OutTechnical data:

€39.15*

RigPortL1bus

The RigPortL1bus contains five hard-wired RigPortL1 with a length of 10m without intermediate connectors. The start and end is an integrated Powercon connection.Specific features:Fixed, pre-assembled system based on RigPortRigPort Clamps included for quick installation in the traverseHigh price savings compared to modular construction - up to 70%!Lower loop resistance due to the lowest number of plug connectionsgreatly reduced setup timesCustomer-specific configurations possibleConnections:1x Powercon-In11x Powercon-Out (5x L1)1x Powercon(white)-Through OutTechnical data:

€281.55*

RigPort16CEEbus

The RigPort16CEEbus contains five hard-wired RigPort16 with a length of 12m (1m+4x2.5m+1m) without intermediate connectors. The start and end is an integrated CEE16 cable plug/-socketSpecific features:Fixed, pre-assembled system based on RigPortRigPort Clamps included for quick installation in the traverseHigh price savings compared to modular construction - up to 70%!Lower loop resistance due to the lowest number of plug connectionsgreatly reduced setup timesCustomer-specific configurations possible , e.g. for pre-equipped 3m trusses in the dolly [ CEE-0.5m-Rigport-1m-Rigport-1m-Rigport-0.5m-CEE ]Connections:1x CEE16-5p-In15x Powercon-Out (5x Rigport16)1x CEE16-5p-Through OutTechnical data:

€358.19*

RigPort8xT1

The RigPort8xT1 is an IP54, multiple connector with 8 Powercon True1 connections, suitable as a central star distribution for many devices in a nearby area.Specific features:subtle designvery stable metal housing suitable for outdoor usesafe and firm latchesCan be positioned variably in the traverseM10 screw mount for attaching couplers, trigger clamps or similar.2x M4 mountenables fast cablingeasy to combineRigPort Safety available for secondary backupConnections:1x Powercon-T1-In8x Powercon-T1-Out1x Powercon-T1-Through OutTechnical data:

€281.55*

WatchDogL1S1

The WatchDogL1S1 is a smart Wi-Fi power monitor with online voltage/current measurement for looping into 1-phase Powercon supply lines.Specific features:two programmable 16 amp switching outputs (WatchDog function for limit values)Power measurement on each channelWeb server for monitoring and configurationWi-Fi, MQTT, Bluetooth...Performance measurement with data storageSmart schedules, scripting, webhooksShelly Plus 2PM Connections:1x Powercon-In NAC3MPXXA 1x Schuko breakout1x Powercon-Through Out NAC3MPXXBTechnical data:

€99.96*

RigPortL1-T1bus

The RigPortL1-T1bus contains five hard-wired RigPortL1-T1s with a length of 10m without intermediate connectors. The start and end is each an integrated Powercon True1 connection.Specific features:Fixed, pre-assembled system based on RigPortRigPort Clamps included for quick installation in the traverseHigh price savings compared to modular construction - up to 70%!Lower loop resistance due to the lowest number of plug connectionsgreatly reduced setup timesCustomer-specific configurations possible , e.g. for pre-equipped 3m trusses in the dolly [ Rigport-1m-Rigport-1m-Rigport-1m-Rigport ]Connections:1x Powercon-T1-In11x Powercon-T1-Out (5x L1)1x Powercon-T1-Through OutTechnical data:

€308.21*

RigPort4xT1

The RigPort4xT1 is an IP54, multiple connector with 4 Powercon True1 connections, suitable as a central star distribution for many devices in a nearby area.Specific features:Stable metal housing suitable for outdoor useM10 screw mount for attaching couplers, trigger clamps or similar.2x M4 mountConnections:1x Powercon-T1-In4x Powercon-T1-Out1x Powercon-Through OutTechnical data:

€164.93*

RigPortL1S4LED

The RigPortL1S4LED is a Powercon BreakoutBox with 4 side Schuko sockets with LED.Specific features:Fixed, pre-assembled system based on RigPortHigh price savings compared to modular construction - up to 70%!Lower loop resistance due to the lowest number of plug connectionsgreatly reduced setup timesnot suitable for assembly with RigPort Clamps4 holes for fixed mountingNot only suitable for event technology but also as a clean, unobtrusive and freely expandable power supply for offices or conference roomsConnections:1x Powercon-In4x Schuko out1x Powercon-Through OutTechnical data:

€69.97*

RigPortL1-2xT1

The RigPortL1-2xT1 is an adapter breakout box with Powercon bus and 2x PowertconT1 breakout.Specific features:Adapter Powercon Bus and 2x PowerconT1subtle design, yet small and lightsafe and firm latchesDimensionally stable housing made of impact-resistant plasticCan be installed quickly and easily using RigPort Clamps (except L1S4 line)Can be positioned variably in the traverseeasy to combineRigPort Safety available for secondary backupConnections:1x Powercon In2x Powercon True1Out1x Powercon through out Technical data:

€64.97*

RigPortL1-T1-Mix

The RigPortL1-T1-2xPC is an adapter breakout box with PowerconTrue1 bus and 2x Powertcon breakout.Specific features:Adapter Powercon Bus and 2x PowerconT1subtle design, yet small and lightsafe and firm latchesDimensionally stable housing made of impact-resistant plasticCan be installed quickly and easily using RigPort Clamps (except L1S4 line)Can be positioned variably in the traverseeasy to combineRigPort Safety available for secondary backupConnections:1x PowerconT1-In2x Powercon out1x PowerconT1 through outTechnical data:

€64.97*

RigPortL1-T1-2xPC

€58.31*

RigPort PlugBox

The RigPort PlugBox is an 8-channel PowerconT1 breakout plug box with Han6 in and out.IP651x Han6-In8x Powercon T1 Out1x Han6 through-outBlack

€449.00* €514.79* (12.78% saved)

RigPortL1bus-1m

The RigPortL1bus-1m is a RigPortL1 within 1m powercon cable.Specific features:Fixed, pre-assembled system based on RigPortHigh price savings compared to modular construction - up to 70%!Lower loop resistance due to the lowest number of plug connectionsgreatly reduced setup timesConnections:1x Powercon-In2x Powercon-Out1x Powercon-Through OutTechnical data:

€79.97*

RigPortL1bus-1mS

The RigPortL1bus-1mS-1m is a RigPortL1 within 1m Schuko cable.Specific features:Fixed, pre-assembled system based on RigPortHigh price savings compared to modular construction - up to 70%!Lower loop resistance due to the lowest number of plug connectionsgreatly reduced setup timesConnections:1x Powercon-In2x Powercon-Out1x Powercon-Through OutTechnical data:

€74.97*

RigPortL1-T1bus-1m

The RigPortL1-T1bus-1m is a RigPortL1 within 1m PowerconTrue1 cable.Specific features:Fixed, pre-assembled system based on RigPortHigh price savings compared to modular construction - up to 70%!Lower loop resistance due to the lowest number of plug connectionsgreatly reduced setup timesConnections:1x Powercon-T1-In2x Powercon-T1-Out1x Powercon-T1-Through OutTechnical data:

€101.63*

RigPortL1-T1bus1mS

The RigPortL1-T1bus1mS-1m is a RigPortL1-T1 within 1m Schuko cable.Specific features:Fixed, pre-assembled system based on RigPortHigh price savings compared to modular construction - up to 70%!Lower loop resistance due to the lowest number of plug connectionsgreatly reduced setup timesConnections:1x Schuko-In2x Powercon-T1-Out1x Powercon-T1-Through OutTechnical data:

€94.96*

RigPort16T1CEEbus

The RigPort16T1CEEbus contains five hard-wired RigPort16T1 with a length of 12m (1m+4x2.5m+1m) without intermediate connectors. The start and end is an integrated CEE16 cable plug/-socketSpecific features:Fixed, pre-assembled system based on RigPortRigPort Clamps included for quick installation in the traverseHigh price savings compared to modular construction - up to 70%!Lower loop resistance due to the lowest number of plug connectionsgreatly reduced setup timesCustomer-specific configurations possible , e.g. for pre-equipped 3m trusses in the dolly [ CEE-0.5m-Rigport-1m-Rigport-1m-Rigport-0.5m-CEE ]Connections:1x CEE16-5p-In15x Powercon-T1-Out (5x Rigport16)1x CEE16-5p-Through OutTechnical data:

€383.18*

RigPort

Die RigPort Serie ist unser innovatives System für eine einfache und schnelle Stromverteilung, optimiert für den Einsatz in der Traverse. Durch die Minimierung der Größe und des Gewichtes unserer Produkte lassen sie sich leicht verbergen, was Ihnen eine unauffällige Stromverteilung für z. B. einen Messestand oder eine Produktion im Theater ermöglicht. Durch die Verwendung unserer Clamp können Sie ihr Projekt weiter optimieren, da Sie einfach und schnell eine Stromquelle am benötigten Punkt im Aufbau schaffen können. Unser Produktdesign verfolgt stets die Prinzipien:

schnell
einfach
und genau da, wo Sie es brauchen

Sie möchten in Zukunft auf die unelegante Verteilung durch eine große Zahl an anderen Kabeln verzichten? Sie möchten Strom wo Sie ihn brauchen? Nehmen Sie Kontakt mit uns auf und wir erläutern Ihnen gerne die Vorteile unseres Systems.