RigPort16T1CEEbus

€383.18*

Available in 1 day, delivery time 21 days

Product number: 0198016

Product information "RigPort16T1CEEbus"

The RigPort16T1CEEbus contains five hard-wired RigPort16T1 with a length of 12m (1m+4x2.5m+1m) without intermediate connectors. The start and end is an integrated CEE16 cable plug/-socket

Specific features:

Fixed, pre-assembled system based on RigPort
RigPort Clamps included for quick installation in the traverse
High price savings compared to modular construction - up to 70%!
Lower loop resistance due to the lowest number of plug connections
greatly reduced setup times
Customer-specific configurations possible , e.g. for pre-equipped 3m trusses in the dolly [ CEE-0.5m-Rigport-1m-Rigport-1m-Rigport-0.5m-CEE ]

Connections:

1x CEE16-5p-In
15x Powercon-T1-Out (5x Rigport16)
1x CEE16-5p-Through Out

Technical data:

Conductor cross-section:	2,5mm²
HS Code:	85369010
Material:	Gummi, Polyamid
Maximum current:	3x16A, 3x16A out
Maximum temperature:	55°C
Measurements:	L. ges.: 12m L. Brücke: 4x2,5m
Protection class:	IP20
Weight:	7,6Kg

0 of 0 reviews

Leave a review!

Share your experiences with other customers.

Login

Your email address

Your password

No reviews found. Share your insights with others.

Accessory Items

RigPort Clamp

The RigPort Clamp is a truss clamp (50mm) for quick fixation of the RigPort line. Two clamps are required per port.Attention: this is not a lifting device, which is why a secondary safety device may be required!not compatible with L1S4 line Technical data:

€2.90*

Accessory Items

RigPortL1

The RigPortL1 is a breakout box with Powercon connections.Specific features:subtle design, yet small and lightsafe and firm latchesDimensionally stable housing made of impact-resistant plasticCan be installed quickly and easily using RigPort Clamps (except L1S4 line)Can be positioned variably in the traverseeasy to combineRigPort Safety available for secondary backupConnections:1x Powercon In2x Powercon out1x Powercon through outTechnical data:

€44.98*

RigPortL1-2xT1

The RigPortL1-2xT1 is an adapter breakout box with Powercon bus and 2x PowertconT1 breakout.Specific features:Adapter Powercon Bus and 2x PowerconT1subtle design, yet small and lightsafe and firm latchesDimensionally stable housing made of impact-resistant plasticCan be installed quickly and easily using RigPort Clamps (except L1S4 line)Can be positioned variably in the traverseeasy to combineRigPort Safety available for secondary backupConnections:1x Powercon In2x Powercon True1Out1x Powercon through out Technical data:

€44.98*

RigPortL1-Mix

Product information “RigPortL1 Mix”The RigPortL1 mix is an adapter breakout box with Powercon bus and mix of 1xPowercon and 1x PowertconT1 breakout.Specific features:Adapter Powercon bus with 1x Powercon and 1x PowerconT1 breakoutsubtle design, yet small and lightsafe and firm latchesDimensionally stable housing made of impact-resistant plasticCan be installed quickly and easily using RigPort Clamps (except L1S4 line)Can be positioned variably in the traverseeasy to combineRigPort Safety available for secondary backupConnections:1x Powercon In1x Powercon True1Out1x Powercon Out1x Powercon through outTechnical data:

€44.98*

RigPortL1-T1-Mix

The RigPortL1-T1-2xPC is an adapter breakout box with PowerconTrue1 bus and 2x Powertcon breakout.Specific features:Adapter Powercon Bus and 2x PowerconT1subtle design, yet small and lightsafe and firm latchesDimensionally stable housing made of impact-resistant plasticCan be installed quickly and easily using RigPort Clamps (except L1S4 line)Can be positioned variably in the traverseeasy to combineRigPort Safety available for secondary backupConnections:1x PowerconT1-In2x Powercon out1x PowerconT1 through outTechnical data:

€44.98*

RigPortL1-T1-2xPC

€44.98*

RPL16-MKII

The RPL16-MKII is a CEE16, 3-phase power distributor with side outlets. Powercon taps of all three phases.16A CEE --> Powercon BreakoutBoxSpecific features:CEE Inlinesmall maintenance-free on-stage power distributionscompletely black for the most inconspicuous installation possibleCan be mounted in the traverse with RPL-Clamp50M10 screw mount for attaching couplers, trigger clamps or similar.2x M4 mountsuitable for outdoor useConnections:1x CEE16-5p-In3x Powercon-Out1x CEE16-5p-Through OutTechnical data:

€129.95*