Tipp
DataPort
158,27 €*
Der DataPort ist eine Wi-Fi Schnittstelle für das Watchdog System.Er eröffnet RigPort die gesamte IIoT Welt der Veranstaltungstechnik.Durch einfache Integration der Ports an beliebiger Position ihres Geländes, kann jede noch so ungewöhnlich Eigenschaft durch entsprechenden Sensor/Datenquelle erfasst, oder jegliche notwendige Aktion im Feld gesteuert und typische Standard Schnittstellen eingebunden werden.Die Kommunikation erfolgt hierbei Wireless (Wi-Fi, Bluetooth)zudem kann er zusätzlich als Wi-Fi Repeater oder Wi-Fi Access Point bei 2,4GHz auftreten.
Anbindungs- Beispiele:LastmessztellenTemperaturPegelstandWindstärkeZählerSchalter, Relais, Melder, Signal, Anzeigen,Daten Wi-Fi- Lastdatenerfassung: für die Traverse Der LoadPort ist ein 4...20mA oder 0-10V Lastmesszellen Auswertungs- und Übertragungs- Node für die Traverse. Die Handelsüblichen 4...20mA & 0-10V Lastmesszellen aller Hersteller lassen sie hierüber überall und jederzeit über Wi-Fi anbinden und übertragen. Strom lässt sich hierbei angenehm durchschleifenEine Anschließende Auswertung und Weiterverarbeitung in einer Zentrale macht dies sehr attraktiv. Hiermit kann jede D8, D8PLUS, C1 Anwendung um Lastdatenermittlung erweitert werden!In Verbindung mit dem RackPortMain1 kann zudem das komplette Feld an Sensoren managed werden.Aufbau: integriertes Weitbereichsnetzteil (90-264VAC) Rigport Clamp kompatibel0-10V Analog Input (die wahrscheinlich günstigste Weise Lastmesszellen auszuwerten)Ein und Ausgänge als GPIO. Somit auch viele SchnittstellenHW Schnittstellen:1x Powercon-T1 In
1x Powercon-T1 Out1xXLR5m X-GPI (2x Input, Impuls-In, SensrDataI-In)1x XLR5f X-GPI (Output 2x Dry-Contact 100mA)1x XLR4f X-Payload (4..20mA, 0-10V Input)X-GPI (Input)
Tipp
DataPort-Load-500-4Set
5.414,50 €*
Das DataPort-Load-500-4Set ist ein 4-Fach Wi-Fi- Lastdatenerfassungs-Set für die TraverseAuch passend zum Watchdog System.Roadtaugliches 4-er Set robust im Hartschalen-Case.Ready2GoDie Kommunikation erfolgt hierbei Wireless (Wi-Fi, Bluetooth)zudem kann er zusätzlich als Wi-Fi Repeater oder Wi-Fi Access Point bei 2,4GHz auftreten.Wi-Fi- Lastdatenerfassung: für die Traverse Der LoadPort ist ein 4...20mA oder 0-10V Lastmesszellen Auswertungs- und Übertragungs- Node für die Traverse. Die Handelsüblichen 4...20mA & 0-10V Lastmesszellen aller Hersteller lassen sie hierüber überall und jederzeit über Wi-Fi anbinden und übertragen. Strom lässt sich hierbei angenehm durchschleifenEine Anschließende Auswertung und Weiterverarbeitung in einer Zentrale macht dies sehr attraktiv. Hiermit kann jede D8, D8PLUS, C1 Anwendung um Lastdatenermittlung erweitert werden!In Verbindung mit dem RackPortMain1 kann zudem das komplette Feld an Sensoren managed werden.Bestehend aus: 4x DataPort8x Rigport Clamp4x 1m Kabel4x Primosensor 5Kn Lastmesszelle1x PeliCase 1450-001-110E mit EinlageHW Schnittstellen:1x Powercon-T1 In
1x Powercon-T1 Out1xXLR5m X-GPI (2x Input, Impuls-In, SensrDataI-In)1x XLR5f X-GPI (Output 2x Dry-Contact 100mA)1x XLR4f X-Payload (4..20mA, 0-10V Input)X-GPI (Input)
Tipp
DataPort-Load-500-Set
1.249,50 €*
Das DataPort-Load-500-Set ist eine Wi-Fi- Lastdatenerfassung für die TraverseAuch passend zum Watchdog System.Die Kommunikation erfolgt hierbei Wireless (Wi-Fi, Bluetooth)zudem kann er zusätzlich als Wi-Fi Repeater oder Wi-Fi Access Point bei 2,4GHz auftreten.Wi-Fi- Lastdatenerfassung: für die Traverse Der LoadPort ist ein 4...20mA oder 0-10V Lastmesszellen Auswertungs- und Übertragungs- Node für die Traverse. Die Handelsüblichen 4...20mA & 0-10V Lastmesszellen aller Hersteller lassen sie hierüber überall und jederzeit über Wi-Fi anbinden und übertragen. Strom lässt sich hierbei angenehm durchschleifenEine Anschließende Auswertung und Weiterverarbeitung in einer Zentrale macht dies sehr attraktiv. Hiermit kann jede D8, D8PLUS, C1 Anwendung um Lastdatenermittlung erweitert werden!In Verbindung mit dem RackPortMain1 kann zudem das komplette Feld an Sensoren managed werden.Bestehend aus: DataPort2x Rigport Clamp1m KabelPrimosensor 5Kn (500kg) LastmesszelleHW Schnittstellen:1x Powercon-T1 In
1x Powercon-T1 Out1xXLR5m X-GPI (2x Input, Impuls-In, SensrDataI-In)1x XLR5f X-GPI (Output 2x Dry-Contact 100mA)1x XLR4f X-Payload (4..20mA, 0-10V Input)X-GPI (Input)
Tipp
DataPort-Temp-Set
203,25 €*
Das DataPort-Temp-Set ist ein Wi-Fi Temperatur Messsystem für das Watchdog System.Er eröffnet RigPort die gesamte IIoT Welt der Veranstaltungstechnik.Die Kommunikation erfolgt hierbei Wireless (Wi-Fi, Bluetooth)zudem kann er zusätzlich als Wi-Fi Repeater oder Wi-Fi Access Point bei 2,4GHz auftreten.Wi-Fi- Temperaturdatenerfassung: für die Traverse Der LoadPort ist ein Temperaturmesszellen Auswertungs- und Übertragungs- Node für die Traverse. Strom lässt sich hierbei angenehm durchschleifenEine Anschließende Auswertung und Weiterverarbeitung in einer Zentrale macht dies sehr attraktiv. Hiermit kann auf dem kompletten Areal jede Temperatur ermittelt werden!In Verbindung mit dem RackPortMain1 kann zudem das komplette Feld an Sensoren managed werden.Bestehend aus: 1x DataPort2x Rigport Clamp1x Temperatursensor DS18B20 (Digital, mehrere parallel anschließbar, Wasserdicht)HW Schnittstellen:1x Powercon-T1 In
1x Powercon-T1 Out1xXLR5m X-GPI (2x Input, Impuls-In, SensrDataI-In)1x XLR5f X-GPI (Output 2x Dry-Contact 100mA)1x XLR4f X-Payload (4..20mA, 0-10V Input)X-GPI (Input)
Tipp
DataPort-Wind-Set
541,45 €*
Das DataPort-Wind-Set ist ein Wi-Fi Wind Sensor- "Anemometer", Set im PeliCase.Auch als Schnittstelle für das Watchdog System.Es eröffnet RigPort die gesamte IIoT Welt der Veranstaltungstechnik.Durch einfache Integration der Ports an beliebiger Position ihres Geländes, kann jede noch so ungewöhnlich Eigenschaft durch entsprechenden Sensor/Datenquelle erfasst, oder jegliche notwendige Aktion im Feld gesteuert und typische Standard Schnittstellen eingebunden werden.Die Kommunikation erfolgt hierbei Wireless (Wi-Fi, Bluetooth)zudem kann er zusätzlich als Wi-Fi Repeater oder Wi-Fi Access Point bei 2,4GHz auftreten.
Wi-Fi-Winddatenerfassung: für die Traverse Das DataPort-Wind-Set ist ein Windmesszellen (Anemometer) Auswertungs- und Übertragungs- Node für die Strom lässt sich hierbei angenehm durchschleifenEine Anschließende Auswertung und Weiterverarbeitung in einer Zentrale macht dies sehr attraktiv. Hiermit können Windgeschwindigkeiten erfasst und zentral ausgewertet werden!In Verbindung mit dem RackPortMain1 kann zudem das komplette Feld an Sensoren managed werden.Bestehend aus: 1x DataPort2x Rigport Clamp1x Anemometer aus robustem Metall 1x Truss-Clamp1x Verbindungskabel1x PeliCase 1450-001-110E (formschlüssig)HW Schnittstellen:1x Powercon-T1 In
1x Powercon-T1 Out1xXLR5m X-GPI (2x Input, Impuls-In, SensrDataI-In)1x XLR5f X-GPI (Output 2x Dry-Contact 100mA)1x XLR4f X-Payload (4..20mA, 0-10V Input)X-GPI (Input)
RackPort16-PM
Ab
281,55 €*
Der RackPortPM16 ist ein 19" Powermonitor zum Nachrüsten.
Spannung/Strom -Anzeige zum einfachen Einschleifen in 3-phasige Versorgungsstränge, bestehender Verteiler-Racks.
nur eine Höheneinheit (1HE = 4,44cm)
Spezifische Merkmale:
Rackmontage: Front / Rear / Tiefenverstellbar
3x Digitalanzeige Voltmeter Amperemeter für jede Phase
40-400V/100A präzises Digitalmeter Voltmeter Amperemeter
LCD-Bildschirm mit großem Betrachtungswinkel
schaltbare Hintergrundbeleuchtung
Spannungsmessbereich: 40-400V, Messgenauigkeit: ± 1%
Strommessbereich: 0-100A
Anlaufstrom: 0.02A, Messgenauigkeit: ± 1%
1m Kabel in/out
Anschlüsse:
1x CEE16-In
1x CEE16-Out
Technische Daten:
RackPort16-PM-WD
548,11 €*
Der RackPortWD16 ist ein intelligenter und smarter Powermonitor zum Einklinken in 3-phasige 16 Ampere Versorgungsstränge.
Spannung/Strom -Anzeige zum Einschleifen in 3-phasige Versorgungsstränge
nur eine Höheneinheit (1HE = 4,44cm)
Spezifische Merkmale:
Messung aller 3x Außenleiter
WatchDog Funktion bei Grenzwerten
Leistungsmessung auf jedem Kanal
Webserver zum Monitoren und Konfigurieren
Ethernet, Wi-Fi, MQTT, Bluetooth...
Leistungsmessung mit Datenspeicherung
Intelligente Zeitpläne, Skripting, Webhooks
N-Leitermessung
3x Digitalanzeige Voltmeter Amperemeter, blau für jede Phase
Spannungsmessbereich: 60 V bis 500 V, Messgenauigkeit ±1
Strommessung: 0 bis 100 A, Messgenauigkeit ±1
1m Kabel in/outShelly Pro 3EM
Optional: Schaltausgang
Anschlüsse:
1x Ethernet
1x CEE16-In
1x CEE16-Out
user manual
Technische Daten:
RackPort32-PM
314,87 €*
Der RackPortPM32 ist ein 19" Powermonitor zum Nachrüsten.
Spannung/Strom -Anzeige zum einfachen Einschleifen in 3-phasige Versorgungsstränge, bestehender Verteiler-Racks.
nur eine Höheneinheit (1HE = 4,44cm)
Spezifische Merkmale:
Rackmontage: Front / Rear / Tiefenverstellbar
3x Digitalanzeige Voltmeter Amperemeter für jede Phase
40-400V/100A präzises Digitalmeter Voltmeter Amperemeter
LCD-Bildschirm mit großem Betrachtungswinkel
schaltbare Hintergrundbeleuchtung
Spannungsmessbereich: 40-400V, Messgenauigkeit: ± 1%
Strommessbereich: 0-100A
Anlaufstrom: 0.02A, Messgenauigkeit: ± 1%
1m Kabel in/out
Anschlüsse:
1x CEE32-In
1x CEE32-Out
Technische Daten:
RackPort32-PM-WD
581,43 €*
Der RackPortWD32 ist ein intelligenter und smarter Powermonitor zum Einklinken in 3-phasige 32 Ampere Versorgungsstränge.
Spannung/Strom -Anzeige zum Einschleifen in 3-phasige Versorgungsstränge
nur eine Höheneinheit (1HE = 4,44cm)
Spezifische Merkmale:
Messung aller 3x Außenleiter
WatchDog Funktion bei Grenzwerten
Leistungsmessung auf jedem Kanal
Webserver zum Monitoren und Konfigurieren
Ethernet, Wi-Fi, MQTT, Bluetooth...
Leistungsmessung mit Datenspeicherung
Intelligente Zeitpläne, Skripting, Webhooks
N-Leitermessung
3x Digitalanzeige Voltmeter Amperemeter, blau für jede PhaseSpannungsmessbereich: 60 V bis 500 V, Messgenauigkeit ±1
Strommessung: 0 bis 100 A, Messgenauigkeit ±1
1m Kabel in/outShelly Pro 3EM
Optional: Schaltausgang
Anschlüsse:
1x Ethernet
1x CEE32-In
1x CEE32-Out
user manual
Technische Daten:
RackPort63-PM
514,79 €*
Der RackPortPM63 ist ein 19" Powermonitor zum Nachrüsten.
Spannung/Strom -Anzeige zum einfachen Einschleifen in 3-phasige Versorgungsstränge, bestehender Verteiler-Racks.
nur eine Höheneinheit (1HE = 4,44cm)
Spezifische Merkmale:
Rackmontage: Front / Rear / Tiefenverstellbar
3x Digitalanzeige Voltmeter Amperemeter für jede Phase
40-400V/100A präzises Digitalmeter Voltmeter Amperemeter
LCD-Bildschirm mit großem Betrachtungswinkel
schaltbare Hintergrundbeleuchtung
Spannungsmessbereich: 40-400V, Messgenauigkeit: ± 1%
Strommessbereich: 0-100A
Anlaufstrom: 0.02A, Messgenauigkeit: ± 1%
1m Kabel in/out
Anschlüsse:
1x CEE63-In
1x CEE63-Out
Technische Daten:
RackPort63-PM-WD
748,03 €*
Der RackPortWD63 ist ein intelligenter und smarter Powermonitor zum Einklinken in 3-phasige 63 Ampere Versorgungsstränge.
Spannung/Strom -Anzeige zum Einschleifen in 3-phasige Versorgungsstränge
nur eine Höheneinheit (1HE = 4,44cm)
Spezifische Merkmale:
Messung aller 3x Außenleiter
WatchDog Funktion bei Grenzwerten
Leistungsmessung auf jedem Kanal
Webserver zum Monitoren und Konfigurieren
Ethernet, Wi-Fi, MQTT, Bluetooth...
Leistungsmessung mit Datenspeicherung
Intelligente Zeitpläne, Skripting, Webhooks
N-Leitermessung
3x Digitalanzeige Voltmeter Amperemeter, blau für jede PhaseSpannungsmessbereich: 60 V bis 500 V, Messgenauigkeit ±1
Strommessung: 0 bis 100 A, Messgenauigkeit ±1
1m Kabel in/outShelly Pro 3EM
Optional: Schaltausgang
Anschlüsse:
1x Ethernet
1x CEE63-In
1x CEE63-Out
Dokumentation:
User-Manual
Technische Daten:
Tipp
RackPortMain1
798,01 €*
RackPortMain1 - Vielseitiger 1HE MiniServer für Systemüberwachung und mehrDer RackPortMain1 ist ein kompakter 1HE MiniServer, der ideal als zentrale Steuerungseinheit für die Watchdog Systemüberwachung eingesetzt werden kann. Mit einem frei konfigurierbaren Raspberry Pi 5 Webserver auf Linux-Basis bietet er unzählige Einsatzmöglichkeiten.Nutzen Sie ihn beispielsweise zur Anzeige von Wifi Powermonitoren, Lastmesszellen oder anderen externen Anwendungen, die auf Überschreitungen von Schwellenwerten oder Timer reagieren.Dank des offenen Betriebssystems und der Leistungsfähigkeit des Raspberry Pi 5 sind Ihrer Kreativität keine Grenzen gesetzt.Leistungsmerkmale:Raspberry Pi 5: Offenes Linux-System als Basis mit vorinstallierten Docker-ContainernHomeAssistantNode-RedInfluxDBMosquittoUmfangreiche Kommunikationsmöglichkeiten: Webserver, MQTT, ModBus, HTML, Bluetooth usw.Hohe Betriebssicherheit: SSD (Solid State Drive) für erhöhte StabilitätLeistungsstarke Hardware:25W Netzteil über GPIO-PortInterner 8-Port 1Gbit SwitchVielseitige Anschlussmöglichkeiten:1x Powercon True1 In1x Powercon True1 Out7x Ethernet (6x Front, 1x Rear)3x USB2x HDMI2x Erweiterungsport für eigene Anwendungen wie DMX oder GPIOsTechnische Spezifikationen:ARM Cortex 2,4GHz8GB RAM128GB SSD230VAC, 30WWeitere Ressourcen:Links zu Installationsskripten und Templates finden Sie hier:WatchDog (Strom, Spannung, Leistung, CosPhi…)LastmesszellenTemperatursensorenWindsensoren
User-Manual-Rigport-StagePort_de_V0-1User_Manual_WatchDog
RigPort Clamp
2,90 €*
Die RigPort Clamp ist eine Traversen-Klammer (50mm) zur schnellen Fixierung der RigPort Linie. Pro Port sind zwei Klammern notwendig.
Achtung: es handelt sich dabei um kein Anschlagmittel, weshalb es gegebenenfalls einer Sekundärsicherung bedarf!
nicht kompatibel mit L1S4-LinieInfo:Pro Artikel aus der L1 Reihe werden 2 RigPort Clamps benötigt!
Technische Daten:
RigPortL1-PM-WD
84,97 €*
Der RigPortL1PM ist ein einfacher Wi-Fi Powermonitor mit Spannung / Strom -Anzeige mit Powercon Anschlüssen zum Einschleifen in 1-phasige Powercon Versorgungsstränge.
Spezifische Merkmale:
40-400V/100A hochpräzises Digitalmeter Voltmeter Amperemeter
LCD-Bildschirm mit großem Betrachtungswinkel
schaltbare Hintergrundbeleuchtung
Spannungsmessbereich: 40-400V
Messgenauigkeit: ± 1%
Strommessbereich: 0-100A
Anlaufstrom: 0.02A
Messgenauigkeit: ± 1%
Wi-Fi Messung von Strom und SpannungShelly Plus PM mini
Anschlüsse:
1x Powercon-In NAC3MPXXA
1x Powercon-Through Out NAC3MPXXB
Technische Daten:
RigPortL1T1-PM-WD
91,63 €*
Der RigPortL1T1PM ist ein einfacher Wi-Fi Powermonitor mit Spannung / Strom -Anzeige mit Powercon-True1 Anschlüssen zum Einschleifen in 1-phasige Powercon-True1 Versorgungsstränge.
Spezifische Merkmale:
40-400V/100A hochpräzises Digitalmeter Voltmeter Amperemeter
LCD-Bildschirm mit großem Betrachtungswinkel
schaltbare Hintergrundbeleuchtung
Spannungsmessbereich: 40-400V
Messgenauigkeit: ± 1%
Strommessbereich: 0-100A
Anlaufstrom: 0.02A
Messgenauigkeit: ± 1%
Wi-Fi Messung von Strom und SpannungShelly Plus PM mini
Anschlüsse:
1x Powercon-T1-In NAC3MPX-TOP
1x Powercon-T1-Through Out NAC3FPX-TOP
Technische Daten:
RPL125-PM
666,40 €*
Der RPL125-PM ist ein einfacher Powermonitor zum Einklinken in 3-phasige 125 Ampere Versorgungsstränge.
Spannung/Strom -Anzeige zum Einschleifen in 3-phasige Versorgungsstränge
Spezifische Merkmale:
Messung aller 3x AußenleiterServicesteckdose Powercon über RCBON-Leitermessung
3x Digitalanzeige Voltmeter Amperemeter, für jede Phase
Spannungsmessbereich: 60 V bis 500 V, Messgenauigkeit ±1
Strommessung: 0 bis 150 A, Messgenauigkeit ±1
2x M10, Safety Ösen
Anschlüsse:
1x CEE125-5p Out1x CEE125-5p In1x Powercon (-T1 optional) über RCBO
Dokumentation:user manual
Technische Daten:
RPL125-PM-WD
916,30 €*
Der RPL125-PM-WD ist ein intelligenter
Ethernet &
Wi-Fi Powermonitor zum Einklinken in 3-phasige 125 Ampere Versorgungsstränge.
Spannung/Strom -Anzeige zum Einschleifen in 3-phasige Versorgungsstränge
Spezifische Merkmale:
Messung aller 3x Außenleiter
WatchDog Funktion bei Grenzwerten
Leistungsmessung auf jedem Kanal
Webserver zum Monitoren und Konfigurieren
Ethernet, Wi-Fi, MQTT, Bluetooth...
Leistungsmessung mit Datenspeicherung
Intelligente Zeitpläne, Skripting, Webhooks
EhternetanschlussServicesteckdose Powercon über RCBON-Leitermessung
3x Digitalanzeige Voltmeter Amperemeter, für jede Phase
Spannungsmessbereich: 60 V bis 500 V, Messgenauigkeit ±1
Strommessung: 0 bis 150 A, Messgenauigkeit ±1
2x M10, Safety Ösen
Optional: SchaltausgangShelly Pro 3EMOptional Janitza UMG806
Anschlüsse:
1x CEE125-5p Out1x CEE125-5p In1x Ethercon1x Powercon (-T1 optional) über RCBO
Dokumentation:user manual
Technische Daten:
RPL125-PM-WD pro
1.482,74 €*
in kürze verfügbar in Shelly pro3EM oder Janitza UMG806 Variante!
Bilder noch abweichend!
Der RPL125WD pro ist ein intelligenter Powermonitor höchster Präzision, zum Einklinken in 3-phasige 125 Ampere Versorgungsstränge.
Spannung/Strom -Anzeige zum Einschleifen in 3-phasige Versorgungsstränge
Spezifische Merkmale:
Messung aller 3x Außenleiter
WatchDog Funktion bei Grenzwerten
Leistungsmessung auf jedem Kanal
Webserver zum Monitoren und Konfigurieren
Leistungsmessung mit Datenspeicherung
Intelligente Zeitpläne, Skripting, Webhooks
EhternetanschlussServicesteckdose Powercon über RCBON-Leitermessung
Digitalanzeige
2x M10, Safety Ösen
Optional: SchaltausgangJanitza UMG806
Anschlüsse:
1x CEE125-5p Out1x CEE125-5p In1x Ethercon1x Powercon T1 über RCBO
Dokumentation:user manual
Technische Daten:
RPL16-PM
131,61 €*
Der RPL16-PM ist ein einfacher Powermonitor.
Spannung/Strom -Anzeige zum Einschleifen in 3-phasige 16A Versorgungsstränge
Spezifische Merkmale:
Digitalanzeige Voltmeter Amperemeter, blau
Spannungsmessbereich: 60 V bis 500 V, Messgenauigkeit ±1
Strommessung: 0 bis 100 A, Messgenauigkeit ±1
CEE Inline
kleine wartungsfreie on-Stage Stromverteilungen
komplett schwarz für möglichst unauffällige Installation
mit RPL-Clamp50 in der Traverse montierbar
1x M10, 2x M4
outdoor-tauglich
Anschlüsse:
1x CEE16-5p-In
1x CEE16-5p-Through Out
Dokumentation:
User-Manual
Technische Daten:
RPL16-PM-WD
414,83 €*
Der RPL16WD ist ein Intelligenter Ethernet &
Wi-Fi Powermonitor zum Einklinken in 3-phasige 16 Ampere Versorgungsstränge.Spannung/Strom -Anzeige zum Einschleifen in 3-phasige VersorgungssträngeSpezifische Merkmale:Messung aller 3x AußenleiterWatchDog Funktion bei GrenzwertenLeistungsmessung auf jedem KanalWebserver zum Monitoren und KonfigurierenEthernet, Wi-Fi, MQTT, Bluetooth...Leistungsmessung mit DatenspeicherungIntelligente Zeitpläne, Skripting, Webhooks3x Digitalanzeige Voltmeter Amperemeter, blau für jede PhaseSpannungsmessbereich: 60 V bis 500 V, Messgenauigkeit ±1Strommessung: 0 bis 100 A, Messgenauigkeit ±1mit RigPort RPL-Clamps schnell und einfach montierbar1x M10, 2x M4Shelly Pro 3EMAnschlüsse:1x CEE16-5p-In1x CEE16-5p-Through Out1x EtherconDokumentation:user manual
Technische Daten:
RPL16T1-MKII-WD
399,84 €*
Der RPL16-MKII-WD ist ein
Intelligenter Wi-Fi PowermonitorCEE16, 3-Phasen-Stromverteiler mit seitlichen Abgängen. Powercon-T1 Abgriffe aller drei Phasen.
16A CEE --> Powercon-T1 BreakoutBox
Spezifische Merkmale:
Messung der 3x BreakOuts (ohne CEE)WatchDog Funktion bei GrenzwertenLeistungsmessung auf jedem Kanal Webserver zum Monitoren und Konfigurieren Wi-Fi, MQTT, Bluetooth... Leistungsmessung mit Datenspeicherung Intelligente Zeitpläne, Skripting, WebhooksCEE Inline
kleine wartungsfreie on-Stage Stromverteilungen
komplett schwarz für möglichst unauffällige Installation
mit RPL-Clamp50 in der Traverse montierbar
M10 Schraubaufnahme zur Befestigung von Coupler, Triggerclamps o.ä.
2x M4 Aufnahme
outdoor-tauglichShelly 3EM
Anschlüsse:
1x CEE16-5p-In
3x TrueOne-Out
1x CEE16-5p-Through Out
Technische Daten:
RPL32-PM
139,94 €*
Der RPL32-PM ist ein einfacher Powermonitor.
Spannung/Strom -Anzeige zum Einschleifen in 3-phasige 32A Versorgungsstränge
Spezifische Merkmale:
Digitalanzeige Voltmeter Amperemeter, blau
Spannungsmessbereich: 60 V bis 500 V, Messgenauigkeit ±1
Strommessung: 0 bis 100 A, Messgenauigkeit ±1
CEE Inline
kleine wartungsfreie on-Stage Stromverteilungen
komplett schwarz für möglichst unauffällige Installation
mit RPL-Clamp50 in der Traverse montierbar
1x M10, 2x M4
outdoor-tauglich
Anschlüsse:
1x CEE32-5p-In
1x CEE32-5p-Through Out
Technische Daten:
RPL32-PM-WD
414,83 €*
Der RPL32-PM-WD ist ein Intelligenter Ethernet & Wi-Fi Powermonitor zum Einklinken in 3-phasige 32 Ampere Versorgungsstränge.
Spannung/Strom -Anzeige zum Einschleifen in 3-phasige Versorgungsstränge
Spezifische Merkmale:
Messung aller 3x Außenleiter
WatchDog Funktion bei Grenzwerten
Leistungsmessung auf jedem Kanal
Webserver zum Monitoren und Konfigurieren
Ethernet, Wi-Fi, MQTT, Bluetooth...
Leistungsmessung mit Datenspeicherung
Intelligente Zeitpläne, Skripting, Webhooks
3x Digitalanzeige Voltmeter Amperemeter, blau für jede Phase
Spannungsmessbereich: 60 V bis 500 V, Messgenauigkeit ±1
Strommessung: 0 bis 100 A, Messgenauigkeit ±1
mit RigPort RPL-Clamps schnell und einfach montierbar
1x M10, 2x M4Shelly Pro 3EM
Anschlüsse:
1x CEE32-5p-In
1x CEE32-5p-Through Out1x Ethercon
Dokumentation:user manual
Technische Daten:
# Hier ist ein YAML-Beispielcode
```yaml
title: Shelly 3EM Pro Dashboard
views:
- title: Shelly 3EM Pro
path: shelly_3em_pro
cards:
- type: grid
title: Spannungen und Ströme
columns: 3
square: false
cards:
# Phase 1: Spannung
- type: gauge
entity: sensor.shelly_3em_pro_voltage_phase_1
name: Spannung L1
unit: "V"
min: 207
max: 253
severity:
green: 220
yellow: 240
red: 253
theme: default
# Phase 2: Spannung
- type: gauge
entity: sensor.shelly_3em_pro_voltage_phase_2
name: Spannung L2
unit: "V"
min: 207
max: 253
severity:
green: 220
yellow: 240
red: 253
theme: default
# Phase 3: Spannung
- type: gauge
entity: sensor.shelly_3em_pro_voltage_phase_3
name: Spannung L3
unit: "V"
min: 207
max: 253
severity:
green: 220
yellow: 240
red: 253
theme: default
# Phase 1: Strom
- type: gauge
entity: sensor.shelly_3em_pro_current_phase_1
name: Strom L1
unit: "A"
min: 0
max: 63
severity:
green: 0
yellow: 50
red: 63
theme: default
# Phase 2: Strom
- type: gauge
entity: sensor.shelly_3em_pro_current_phase_2
name: Strom L2
unit: "A"
min: 0
max: 63
severity:
green: 0
yellow: 50
red: 63
theme: default
# Phase 3: Strom
- type: gauge
entity: sensor.shelly_3em_pro_current_phase_3
name: Strom L3
unit: "A"
min: 0
max: 63
severity:
green: 0
yellow: 50
red: 63
theme: default
# Graph der Ströme für Phase 1
- type: history-graph
entities:
- entity: sensor.shelly_3em_pro_current_phase_1
hours_to_show: 24
refresh_interval: 300
name: Stromverlauf L1
# Graph der Ströme für Phase 2
- type: history-graph
entities:
- entity: sensor.shelly_3em_pro_current_phase_2
hours_to_show: 24
refresh_interval: 300
name: Stromverlauf L2
# Graph der Ströme für Phase 3
- type: history-graph
entities:
- entity: sensor.shelly_3em_pro_current_phase_3
hours_to_show: 24
refresh_interval: 300
name: Stromverlauf L3
```
RPL32T1-MKII-WD
441,49 €*
Der RPL32-MKII ist ein
Intelligenter Wi-Fi Powermonitor
CEE32, 3-Phasen-Stromverteiler mit seitlichen Abgängen. Powercon-T1 Abgriffe aller drei Phasen mit jeweiliger selbstrückstellender 16A Sicherung.
32A CEE --> Powercon-T1 (self-resetting fused) BreakoutBox
Spezifische Merkmale:Messung der 3x BreakOuts (ohne CEE)WatchDog Funktion bei GrenzwertenLeistungsmessung auf jedem Kanal Webserver zum Monitoren und Konfigurieren Wi-Fi, MQTT, Bluetooth... Leistungsmessung mit Datenspeicherung Intelligente Zeitpläne, Skripting, Webhooks CEE Inline kleine wartungsfreie on-Stage Stromverteilungen komplett schwarz für möglichst unauffällige Installation mit RPL-Clamp50 in der Traverse montierbar M10 Schraubaufnahme zur Befestigung von Coupler, Triggerclamps o.ä. 2x M4 Aufnahme outdoor-tauglich Shelly 3EM
Anschlüsse:
1x CEE32-5p-In
3x TrueOne-Out
1x CEE32-5p-Through Out
Technische Daten:
RPL63-PM
499,80 €*
Der RPL63-PM ist ein einfacher Powermonitor zum Einklinken in 3-phasige 63 Ampere Versorgungsstränge.
Spannung/Strom -Anzeige zum Einschleifen in 3-phasige Versorgungsstränge
Spezifische Merkmale:
Messung aller 3x AußenleiterServicesteckdose Powercon über RCBON-Leitermessung optional möglich
3x Digitalanzeige Voltmeter Amperemeter, für jede Phase
Spannungsmessbereich: 60 V bis 500 V, Messgenauigkeit ±1
Strommessung: 0 bis 125 A, Messgenauigkeit ±1
2x M10
Anschlüsse:
1x CEE63-5p Out1x CEE63-5p In1x Powercon(-T1 optional) über RCBO
Dokumentation:user manual
Technische Daten:
RPL63-PM-WD
749,70 €*
Der RPL63-PM-WD ist ein intelligenter
Ethernet &
Wi-Fi Powermonitor zum Einklinken in 3-phasige 63 Ampere Versorgungsstränge.
Spannung/Strom -Anzeige zum Einschleifen in 3-phasige Versorgungsstränge
Spezifische Merkmale:
Messung aller 3x Außenleiter
WatchDog Funktion bei Grenzwerten
Leistungsmessung auf jedem Kanal
Webserver zum Monitoren und Konfigurieren
Ethernet, Wi-Fi, MQTT, Bluetooth...
Leistungsmessung mit Datenspeicherung
Intelligente Zeitpläne, Skripting, Webhooks
Ehternetanschluss, Servicesteckdose Powercon über RCBON-Leitermessung optional möglich
3x Digitalanzeige Voltmeter Amperemeter, für jede Phase
Spannungsmessbereich: 60 V bis 500 V, Messgenauigkeit ±1
Strommessung: 0 bis 125 A, Messgenauigkeit ±1
2x M10
Optional: SchaltausgangShelly Pro 3EMOptional Janitza UMG806
Anschlüsse:
1x CEE63-5p Out1x CEE63-5p In1x Ethercon1x Powercon(-T1 optional) über RCBO
Dokumentation:user manual
Technische Daten:
RPL63-PM-WD pro
1.316,14 €*
in kürze verfügbar in Shelly pro3EM oder Janitza UMG806 Variante!Bilder noch abweichend!
Der RPL63WD pro ist ein intelligenter Powermonitor höchster Präzision, zum Einklinken in 3-phasige 63 Ampere Versorgungsstränge.
Spannung/Strom -Anzeige zum Einschleifen in 3-phasige Versorgungsstränge
Spezifische Merkmale:
Messung aller 3x Außenleiter
WatchDog Funktion bei Grenzwerten
Leistungsmessung auf jedem Kanal
Webserver zum Monitoren und Konfigurieren
Leistungsmessung mit Datenspeicherung
Intelligente Zeitpläne, Skripting, Webhooks
Ehternetanschluss, Servicesteckdose Powercon über RCBON-Leitermessung
Digitalanzeige
1x M10, 2x M4
Optional: SchaltausgangJanitza UMG806
Anschlüsse:
1x CEE63-5p Out1x CEE63-5p In1x Ethercon1x Powercon T1 über RCBO
Dokumentation:user manual
Technische Daten:
Tipp
WatchDog_System_Set-63_1
2.841,36 €*
Das
WatchDog_System_Set-63_1
ist ein Energie- Monitoring und Überwachungssystem für kleine Versorgungsnetze mit einem 230/400VAC / 63 Ampere Gesamtwert.Das Set ist ideal um ein eine 63A Zuleitung aufgesplittet auf mehrere Stränge bis zu 4 kritischen Verbrauchern überwacht werden kann.Set bestehend aus: RackPortMain1 als zentrale System Management Einheit zur Erfassung, Darstellung sowie Verarbeitung und Speicherung aller Messwerte zur Automatisierung von Re-/AktionenRackPort63-PM-WD19" 1HE 230/400VAC / 63A / 3 Phasen Messsystem mit Ethernet,Wi-Fi & Bluetooth Schnittstelle zur Online Auswertung2x RPL32-WDMobiles 230/400VAC / 32A / 3 Phasen Messsystem mit Ethernet,Wi-Fi & Bluetooth Schnittstelle zur Online Auswertung
1x RPL16-WDMobiles 230/400VAC / 16A / 3 Phasen Messsystem mit Ethernet,Wi-Fi & Bluetooth Schnittstelle zur Online Auswertung4x RigPortL1T1-PMMobiles 230VAC / 16A / 1 Phasen Messsystem mit Wi-Fi & Bluetooth Schnittstelle zur Online Auswertung
Das System ist komplett eingerichtet uns somit sofort einsatzbereit.Erweiterbarkeit um weitere Sensoren und Aktoren in nahezu unbegrenzter Möglichkeit
WatchDogL1
98,29 €*
Der WatchDogL1 ist ein smarter Wi-Fi Powermonitor mit online Spannung/Strom -Auswertung zum Einschleifen in 1-phasige Powercon Versorgungsstränge.
Spezifische Merkmale:
zwei programmierbare 16Ampere Schaltausgänge (WatchDog Funktion bei Grenzwerten)
Leistungsmessung auf jedem Kanal
Webserver zum Monitoren und Konfigurieren
Wi-Fi, MQTT, Bluetooth...
Leistungsmessung mit Datenspeicherung
Intelligente Zeitpläne, Skripting, WebhooksShelly Plus 2PM
Anschlüsse:
1x Powercon-In NAC3MPXXA
1x Powercon-Breakout NAC3MPXXB
1x Powercon-Through Out NAC3MPXXB
Technische Daten:
WatchDogL1S1
99,96 €*
Der WatchDogL1S1 ist ein smarter Wi-Fi Powermonitor mit online Spannung/Strom -Auswerung zum Einschleifen in 1-phasige Powercon Versorgungsstränge.
Spezifische Merkmale:
zwei programmierbare 16Ampere Schaltausgänge (WatchDog Funktion bei Grenzwerten)
Leistungsmessung auf jedem Kanal
Webserver zum Monitoren und Konfigurieren
Wi-Fi, MQTT, Bluetooth...
Leistungsmessung mit Datenspeicherung
Intelligente Zeitpläne, Skripting, WebhooksShelly Plus 2PM
Anschlüsse:
1x Powercon-In NAC3MPXXA
1x Schuko-Breakout
1x Powercon-Through Out NAC3MPXXB
Technische Daten:
WatchDogL1S1T1
106,62 €*
Der WatchDogL1S1T1 ist ein smarter Wi-Fi Powermonitor mit online Spannung/Strom Auswertung zum Einschleifen in 1-phasige Powercon-True1 Versorgungsstränge.
Spezifische Merkmale:
zwei programmierbare 16Ampere Schaltausgänge (WatchDog Funktion bei Grenzwerten)
Leistungsmessung auf jedem Kanal
Webserver zum Monitoren und Konfigurieren
Wi-Fi, MQTT, Bluetooth...
Leistungsmessung mit Datenspeicherung
Intelligente Zeitpläne, Skripting, WebhooksShelly Plus 2PM
Anschlüsse:
1x Powercon-T1-In NAC3MPXXA
1x Schuko-Breakout
1x Powercon-T1-Through Out NAC3MPXXB
Technische Daten:
WatchDogL1T1
81,63 €*
Der WatchDogL1T1 ist ein smarter Wi-Fi Powermonitor mit online Spannung/Strom -Auswerung zum Einschleifen in 1-phasige Powercon-True1 Versorgungsstränge.
Spezifische Merkmale:
zwei programmierbare 16Ampere Schaltausgänge (WatchDog Funktion bei Grenzwerten)
Leistungsmessung auf jedem Kanal
Webserver zum Monitoren und Konfigurieren
Wi-Fi, MQTT, Bluetooth...
Leistungsmessung mit Datenspeicherung
Intelligente Zeitpläne, Skripting, Webhooks
Wi-Fi, MQTT...Shelly Plus 1PM
Anschlüsse:
1x Powercon-T1-In NAC3MPX-TOP
1x Powercon-T1-Through Out NAC3FPX-TOP
Technische Daten:
WatchDog's
sind Webtechnologie basierte Powermonitore zur Energieübewachnug
Man kann sie in vorhandene Energieversorgungssysteme per plug and play einfach einbinden.
So wird aus herkömmlichen Stromversorgungen ein online überwachbares System.
Ob in
- großen Hauptverteilern
- mittleren Unterverteilern
- 19" Systemen
- in RigPort Versorgungssträngen
- in StagePort Versorgungssträngen
- oder nur ein einzelnes Gerät
Jeder Knoten lässt sich hiermit zentral, lokal oder in ein Gesamtsystem eingebunden in der Cloud weltweit monitoren.
Zur vollen Kontrolle können alle Werte auch in Datenbanken für spätere Untersuchungen protokolliert werden.
Durch internes Scripting kann er auch eigenständig handeln, z.B. bei Überspannung einer Phase, alle Ausgänge abschalten und auch andere Watchdogs fernsteuern.
Durch ein zentrales Steuersystem können darüber hinaus komplexe zusammenhänge und Einflussfaktoren (weiterer Sensoren wie Wind, Temperatur, Gewicht, Sonnenaufgang, Pegelstände, externe Signale, Ereignisse...) logisch verknüpft weden und Dashboards mit Mess-Anzeigen & Grapfhen übersichtlich dargestellt werden.
Der Ansteuerung von Aktoren wie z.B. Relais, Motoren, Beleuchtung... sind ebenfalls keine Grenzen gesetzt.
Energie, Spannung, Strom CosPhi, -Messung: 1Phasig, 3 Phasig, vielphasig, mit/ohne N-Leiter
für die einfache Einbindung sind auch alle Varianten als reine Offline Powermonitore in der PM Variante verfügbar (keine Online Finktionalität, nur inein Messanzeige)
-->Ein Watchdog der Ihr System überwacht
User-Manual-Rigport-StagePort
Code Templates
Home Assistant
Node Red
Home Assitant Dasboard Raw Code anzeigen
Kopiere den Code oder lade ihn herunter:
views:
- type: sections
max_columns: 4
title: Info
path: info
icon: mdi:information-box
sections:
- type: grid
cards:
- type: heading
heading: Neuer Abschnitt
- type: markdown
content: >+
This template contains a pair of prepared dasboards as a
kickstarter.
Please note that this system (RackportMain) may have separate IP
addresses via Wi-Fi and Ethernet.
This can be reached with the IP address:8123 in the network.
Dark mode is recommended in the event area, try to adjust this in
the user settings. This makes it clear that user management is
also possible.
If this dashboard only displays faulty entities, a dummy sensor
(source1) must be created
The easiest way to do this is to open any of the dashboard's
boxes, scroll down to the bottom of the entity and create a new
sensor with "+".
Sensor name:source1
Save.
After this, every display in every dashboard should have a value
of zero.
Realise dashboard.
Now search for and add new devices and entities (e.g. watchdogs)
in the settings.
Watchdog: Is a Shelly, for example. Then Add Devices, Shelly, New
Device --> Enter the IP address of the watchdog.
If this was found, check again whether all sensors are visible, if
not, activate hidden sensors.
Rename device: It is advisable to immediately enter a more
comprehensible name here, as this is much clearer in the dashboard
assignment.
Back to the dashboard:
Entities can now be replaced with real sources in the tiles.
This means that basic functionality has already been created.
Other new dashboards could also link to other internal pre
installed solutions like Node-Red, Grafana, Influx-db, or external
ones. You are fully flexible.
In Any Cases of questions, do not hesitate to contact us.
Juergen Steinbacher CEO Protec GmbH
Info@Rigport.com
www.rigport.com
title: Getting strated
- title: Stage Left
sections:
- type: grid
cards:
- type: heading
icon: mdi:sine-wave
heading: RPL16-PM-WD
heading_style: title
column_span: 4
- type: grid
cards:
- type: heading
icon: mdi:lightning-bolt
heading: Phase1
heading_style: title
grid_options:
columns: 12
rows: 1
- type: gauge
entity: input_number.source1
name: Voltage
unit: V
max: 270
needle: true
severity:
green: 220
yellow: 0
red: 240
min: 190
- type: gauge
entity: input_number.source1
name: Current
unit: A
max: 20
needle: true
severity:
green: 12
yellow: 14
red: 16
- type: gauge
entity: input_number.source1
name: Power
unit: W
max: 4000
needle: true
severity:
green: 2000
yellow: 3000
red: 3600
- type: grid
cards:
- type: heading
icon: mdi:lightning-bolt
heading: Phase2
heading_style: title
grid_options:
columns: 12
rows: 1
- type: gauge
entity: input_number.source1
name: Voltage
unit: V
max: 270
needle: true
severity:
green: 220
yellow: 0
red: 240
min: 190
- type: gauge
entity: input_number.source1
name: Current
unit: A
max: 20
needle: true
severity:
green: 12
yellow: 14
red: 16
- type: gauge
entity: input_number.source1
name: Power
unit: W
max: 4000
needle: true
severity:
green: 2000
yellow: 3000
red: 3600
- type: grid
cards:
- type: heading
icon: mdi:lightning-bolt
heading: Phase3
heading_style: title
grid_options:
columns: 12
rows: 1
- type: gauge
entity: input_number.source1
name: Voltage
unit: V
max: 270
needle: true
severity:
green: 220
yellow: 0
red: 240
min: 190
- type: gauge
entity: input_number.source1
name: Current
unit: A
max: 20
needle: true
severity:
green: 12
yellow: 14
red: 16
- type: gauge
entity: input_number.source1
name: Power
unit: W
max: 4000
needle: true
severity:
green: 2000
yellow: 3000
red: 3600
- type: grid
cards:
- type: heading
heading: more...
heading_style: title
- type: gauge
entity: input_number.source1
name: Frequency
unit: Hz
min: 45
max: 55
needle: true
- type: gauge
entity: input_number.source1
name: CosPhi
min: 0.9
max: 1.1
needle: true
- type: iframe
url: https://www.home-assistant.io
aspect_ratio: 50%
title: Webpage Device
grid_options:
columns: full
rows: 3
- type: grid
cards:
- type: heading
heading: Neuer Abschnitt
heading_style: title
grid_options:
columns: full
rows: 3
- type: heading
icon: mdi:sine-wave
heading: RPL32-PM-WD
heading_style: title
column_span: 4
- type: grid
cards:
- type: heading
icon: mdi:lightning-bolt
heading: Phase1
heading_style: title
grid_options:
columns: 12
rows: 1
- type: gauge
entity: input_number.source1
name: Voltage
unit: V
max: 270
needle: true
severity:
green: 220
yellow: 0
red: 240
min: 190
- type: gauge
entity: input_number.source1
name: Current
unit: A
max: 20
needle: true
severity:
green: 12
yellow: 14
red: 16
- type: gauge
entity: input_number.source1
name: Power
unit: W
max: 4000
needle: true
severity:
green: 2000
yellow: 3000
red: 3600
- type: grid
cards:
- type: heading
icon: mdi:lightning-bolt
heading: Phase2
heading_style: title
grid_options:
columns: 12
rows: 1
- type: gauge
entity: input_number.source1
name: Voltage
unit: V
max: 270
needle: true
severity:
green: 220
yellow: 0
red: 240
min: 190
- type: gauge
entity: input_number.source1
name: Current
unit: A
max: 20
needle: true
severity:
green: 12
yellow: 14
red: 16
- type: gauge
entity: input_number.source1
name: Power
unit: W
max: 4000
needle: true
severity:
green: 2000
yellow: 3000
red: 3600
- type: grid
cards:
- type: heading
icon: mdi:lightning-bolt
heading: Phase3
heading_style: title
grid_options:
columns: 12
rows: 1
- type: gauge
entity: input_number.source1
name: Voltage
unit: V
max: 270
needle: true
severity:
green: 220
yellow: 0
red: 240
min: 190
- type: gauge
entity: input_number.source1
name: Current
unit: A
max: 20
needle: true
severity:
green: 12
yellow: 14
red: 16
- type: gauge
entity: input_number.source1
name: Power
unit: W
max: 4000
needle: true
severity:
green: 2000
yellow: 3000
red: 3600
- type: grid
cards:
- type: heading
heading: more...
heading_style: title
- type: gauge
entity: input_number.source1
name: Frequency
unit: Hz
min: 45
max: 55
needle: true
- type: gauge
entity: input_number.source1
name: CosPhi
min: 0.9
max: 1.1
needle: true
- type: iframe
url: https://www.home-assistant.io
aspect_ratio: 50%
title: Webpage Device
grid_options:
columns: full
rows: 3
type: sections
max_columns: 4
dense_section_placement: true
cards: []
icon: ''
- title: Stage Right
sections:
- type: grid
cards:
- type: heading
icon: mdi:sine-wave
heading: RPL16-PM-WD
heading_style: title
column_span: 4
- type: grid
cards:
- type: heading
icon: mdi:lightning-bolt
heading: Phase1
heading_style: title
grid_options:
columns: 12
rows: 1
- type: gauge
entity: input_number.source1
name: Voltage
unit: V
max: 270
needle: true
severity:
green: 220
yellow: 0
red: 240
min: 190
- type: gauge
entity: input_number.source1
name: Current
unit: A
max: 20
needle: true
severity:
green: 12
yellow: 14
red: 16
- type: gauge
entity: input_number.source1
name: Power
unit: W
max: 4000
needle: true
severity:
green: 2000
yellow: 3000
red: 3600
- type: grid
cards:
- type: heading
icon: mdi:lightning-bolt
heading: Phase2
heading_style: title
grid_options:
columns: 12
rows: 1
- type: gauge
entity: input_number.source1
name: Voltage
unit: V
max: 270
needle: true
severity:
green: 220
yellow: 0
red: 240
min: 190
- type: gauge
entity: input_number.source1
name: Current
unit: A
max: 20
needle: true
severity:
green: 12
yellow: 14
red: 16
- type: gauge
entity: input_number.source1
name: Power
unit: W
max: 4000
needle: true
severity:
green: 2000
yellow: 3000
red: 3600
- type: grid
cards:
- type: heading
icon: mdi:lightning-bolt
heading: Phase3
heading_style: title
grid_options:
columns: 12
rows: 1
- type: gauge
entity: input_number.source1
name: Voltage
unit: V
max: 270
needle: true
severity:
green: 220
yellow: 0
red: 240
min: 190
- type: gauge
entity: input_number.source1
name: Current
unit: A
max: 20
needle: true
severity:
green: 12
yellow: 14
red: 16
- type: gauge
entity: input_number.source1
name: Power
unit: W
max: 4000
needle: true
severity:
green: 2000
yellow: 3000
red: 3600
- type: grid
cards:
- type: heading
heading: more...
heading_style: title
- type: gauge
entity: input_number.source1
name: Frequency
unit: Hz
min: 45
max: 55
needle: true
- type: gauge
entity: input_number.source1
name: CosPhi
min: 0.9
max: 1.1
needle: true
- type: iframe
url: https://www.home-assistant.io
aspect_ratio: 50%
title: Webpage Device
grid_options:
columns: full
rows: 3
- type: grid
cards:
- type: heading
heading: Neuer Abschnitt
heading_style: title
grid_options:
columns: full
rows: 3
- type: heading
icon: mdi:sine-wave
heading: RPL32-PM-WD
heading_style: title
column_span: 4
- type: grid
cards:
- type: heading
icon: mdi:lightning-bolt
heading: Phase1
heading_style: title
grid_options:
columns: 12
rows: 1
- type: gauge
entity: input_number.source1
name: Voltage
unit: V
max: 270
needle: true
severity:
green: 220
yellow: 0
red: 240
min: 190
- type: gauge
entity: input_number.source1
name: Current
unit: A
max: 20
needle: true
severity:
green: 12
yellow: 14
red: 16
- type: gauge
entity: input_number.source1
name: Power
unit: W
max: 4000
needle: true
severity:
green: 2000
yellow: 3000
red: 3600
- type: grid
cards:
- type: heading
icon: mdi:lightning-bolt
heading: Phase2
heading_style: title
grid_options:
columns: 12
rows: 1
- type: gauge
entity: input_number.source1
name: Voltage
unit: V
max: 270
needle: true
severity:
green: 220
yellow: 0
red: 240
min: 190
- type: gauge
entity: input_number.source1
name: Current
unit: A
max: 20
needle: true
severity:
green: 12
yellow: 14
red: 16
- type: gauge
entity: input_number.source1
name: Power
unit: W
max: 4000
needle: true
severity:
green: 2000
yellow: 3000
red: 3600
- type: grid
cards:
- type: heading
icon: mdi:lightning-bolt
heading: Phase3
heading_style: title
grid_options:
columns: 12
rows: 1
- type: gauge
entity: input_number.source1
name: Voltage
unit: V
max: 270
needle: true
severity:
green: 220
yellow: 0
red: 240
min: 190
- type: gauge
entity: input_number.source1
name: Current
unit: A
max: 20
needle: true
severity:
green: 12
yellow: 14
red: 16
- type: gauge
entity: input_number.source1
name: Power
unit: W
max: 4000
needle: true
severity:
green: 2000
yellow: 3000
red: 3600
- type: grid
cards:
- type: heading
heading: more...
heading_style: title
- type: gauge
entity: input_number.source1
name: Frequency
unit: Hz
min: 45
max: 55
needle: true
- type: gauge
entity: input_number.source1
name: CosPhi
min: 0.9
max: 1.1
needle: true
- type: iframe
url: https://www.home-assistant.io
aspect_ratio: 50%
title: Webpage Device
grid_options:
columns: full
rows: 3
type: sections
max_columns: 4
dense_section_placement: true
cards: []
icon: ''
- title: Stage Rigg
sections:
- type: grid
cards:
- type: heading
icon: mdi:sine-wave
heading: RPL16-PM-WD
heading_style: title
column_span: 4
- type: grid
cards:
- type: heading
icon: mdi:lightning-bolt
heading: Phase1
heading_style: title
grid_options:
columns: 12
rows: 1
- type: gauge
entity: input_number.source1
name: Voltage
unit: V
max: 270
needle: true
severity:
green: 220
yellow: 0
red: 240
min: 190
- type: gauge
entity: input_number.source1
name: Current
unit: A
max: 20
needle: true
severity:
green: 12
yellow: 14
red: 16
- type: gauge
entity: input_number.source1
name: Power
unit: W
max: 4000
needle: true
severity:
green: 2000
yellow: 3000
red: 3600
- type: grid
cards:
- type: heading
icon: mdi:lightning-bolt
heading: Phase2
heading_style: title
grid_options:
columns: 12
rows: 1
- type: gauge
entity: input_number.source1
name: Voltage
unit: V
max: 270
needle: true
severity:
green: 220
yellow: 0
red: 240
min: 190
- type: gauge
entity: input_number.source1
name: Current
unit: A
max: 20
needle: true
severity:
green: 12
yellow: 14
red: 16
- type: gauge
entity: input_number.source1
name: Power
unit: W
max: 4000
needle: true
severity:
green: 2000
yellow: 3000
red: 3600
- type: grid
cards:
- type: heading
icon: mdi:lightning-bolt
heading: Phase3
heading_style: title
grid_options:
columns: 12
rows: 1
- type: gauge
entity: input_number.source1
name: Voltage
unit: V
max: 270
needle: true
severity:
green: 220
yellow: 0
red: 240
min: 190
- type: gauge
entity: input_number.source1
name: Current
unit: A
max: 20
needle: true
severity:
green: 12
yellow: 14
red: 16
- type: gauge
entity: input_number.source1
name: Power
unit: W
max: 4000
needle: true
severity:
green: 2000
yellow: 3000
red: 3600
- type: grid
cards:
- type: heading
heading: more...
heading_style: title
- type: gauge
entity: input_number.source1
name: Frequency
unit: Hz
min: 45
max: 55
needle: true
- type: gauge
entity: input_number.source1
name: CosPhi
min: 0.9
max: 1.1
needle: true
- type: iframe
url: https://www.home-assistant.io
aspect_ratio: 50%
title: Webpage Device
grid_options:
columns: full
rows: 3
- type: grid
cards:
- type: heading
heading: Neuer Abschnitt
heading_style: title
grid_options:
columns: full
rows: 3
- type: heading
icon: mdi:sine-wave
heading: RPL32-PM-WD
heading_style: title
column_span: 4
- type: grid
cards:
- type: heading
icon: mdi:lightning-bolt
heading: Phase1
heading_style: title
grid_options:
columns: 12
rows: 1
- type: gauge
entity: input_number.source1
name: Voltage
unit: V
max: 270
needle: true
severity:
green: 220
yellow: 0
red: 240
min: 190
- type: gauge
entity: input_number.source1
name: Current
unit: A
max: 20
needle: true
severity:
green: 12
yellow: 14
red: 16
- type: gauge
entity: input_number.source1
name: Power
unit: W
max: 4000
needle: true
severity:
green: 2000
yellow: 3000
red: 3600
- type: grid
cards:
- type: heading
icon: mdi:lightning-bolt
heading: Phase2
heading_style: title
grid_options:
columns: 12
rows: 1
- type: gauge
entity: input_number.source1
name: Voltage
unit: V
max: 270
needle: true
severity:
green: 220
yellow: 0
red: 240
min: 190
- type: gauge
entity: input_number.source1
name: Current
unit: A
max: 20
needle: true
severity:
green: 12
yellow: 14
red: 16
- type: gauge
entity: input_number.source1
name: Power
unit: W
max: 4000
needle: true
severity:
green: 2000
yellow: 3000
red: 3600
- type: grid
cards:
- type: heading
icon: mdi:lightning-bolt
heading: Phase3
heading_style: title
grid_options:
columns: 12
rows: 1
- type: gauge
entity: input_number.source1
name: Voltage
unit: V
max: 270
needle: true
severity:
green: 220
yellow: 0
red: 240
min: 190
- type: gauge
entity: input_number.source1
name: Current
unit: A
max: 20
needle: true
severity:
green: 12
yellow: 14
red: 16
- type: gauge
entity: input_number.source1
name: Power
unit: W
max: 4000
needle: true
severity:
green: 2000
yellow: 3000
red: 3600
- type: grid
cards:
- type: heading
heading: more...
heading_style: title
- type: gauge
entity: input_number.source1
name: Frequency
unit: Hz
min: 45
max: 55
needle: true
- type: gauge
entity: input_number.source1
name: CosPhi
min: 0.9
max: 1.1
needle: true
- type: iframe
url: https://www.home-assistant.io
aspect_ratio: 50%
title: Webpage Device
grid_options:
columns: full
rows: 3
type: sections
max_columns: 4
dense_section_placement: true
cards: []
icon: ''
- title: FOH
sections:
- type: grid
cards:
- type: heading
icon: mdi:sine-wave
heading: RPL16-PM-WD
heading_style: title
column_span: 4
- type: grid
cards:
- type: heading
icon: mdi:lightning-bolt
heading: Phase1
heading_style: title
grid_options:
columns: 12
rows: 1
- type: gauge
entity: input_number.source1
name: Voltage
unit: V
max: 270
needle: true
severity:
green: 220
yellow: 0
red: 240
min: 190
- type: gauge
entity: input_number.source1
name: Current
unit: A
max: 20
needle: true
severity:
green: 12
yellow: 14
red: 16
- type: gauge
entity: input_number.source1
name: Power
unit: W
max: 4000
needle: true
severity:
green: 2000
yellow: 3000
red: 3600
- type: grid
cards:
- type: heading
icon: mdi:lightning-bolt
heading: Phase2
heading_style: title
grid_options:
columns: 12
rows: 1
- type: gauge
entity: input_number.source1
name: Voltage
unit: V
max: 270
needle: true
severity:
green: 220
yellow: 0
red: 240
min: 190
- type: gauge
entity: input_number.source1
name: Current
unit: A
max: 20
needle: true
severity:
green: 12
yellow: 14
red: 16
- type: gauge
entity: input_number.source1
name: Power
unit: W
max: 4000
needle: true
severity:
green: 2000
yellow: 3000
red: 3600
- type: grid
cards:
- type: heading
icon: mdi:lightning-bolt
heading: Phase3
heading_style: title
grid_options:
columns: 12
rows: 1
- type: gauge
entity: input_number.source1
name: Voltage
unit: V
max: 270
needle: true
severity:
green: 220
yellow: 0
red: 240
min: 190
- type: gauge
entity: input_number.source1
name: Current
unit: A
max: 20
needle: true
severity:
green: 12
yellow: 14
red: 16
- type: gauge
entity: input_number.source1
name: Power
unit: W
max: 4000
needle: true
severity:
green: 2000
yellow: 3000
red: 3600
- type: grid
cards:
- type: heading
heading: more...
heading_style: title
- type: gauge
entity: input_number.source1
name: Frequency
unit: Hz
min: 45
max: 55
needle: true
- type: gauge
entity: input_number.source1
name: CosPhi
min: 0.9
max: 1.1
needle: true
- type: iframe
url: https://www.home-assistant.io
aspect_ratio: 50%
title: Webpage Device
grid_options:
columns: full
rows: 3
- type: grid
cards:
- type: heading
heading: Neuer Abschnitt
heading_style: title
grid_options:
columns: full
rows: 3
- type: heading
icon: mdi:sine-wave
heading: RPL32-PM-WD
heading_style: title
column_span: 4
- type: grid
cards:
- type: heading
icon: mdi:lightning-bolt
heading: Phase1
heading_style: title
grid_options:
columns: 12
rows: 1
- type: gauge
entity: input_number.source1
name: Voltage
unit: V
max: 270
needle: true
severity:
green: 220
yellow: 0
red: 240
min: 190
- type: gauge
entity: input_number.source1
name: Current
unit: A
max: 20
needle: true
severity:
green: 12
yellow: 14
red: 16
- type: gauge
entity: input_number.source1
name: Power
unit: W
max: 4000
needle: true
severity:
green: 2000
yellow: 3000
red: 3600
- type: grid
cards:
- type: heading
icon: mdi:lightning-bolt
heading: Phase2
heading_style: title
grid_options:
columns: 12
rows: 1
- type: gauge
entity: input_number.source1
name: Voltage
unit: V
max: 270
needle: true
severity:
green: 220
yellow: 0
red: 240
min: 190
- type: gauge
entity: input_number.source1
name: Current
unit: A
max: 20
needle: true
severity:
green: 12
yellow: 14
red: 16
- type: gauge
entity: input_number.source1
name: Power
unit: W
max: 4000
needle: true
severity:
green: 2000
yellow: 3000
red: 3600
- type: grid
cards:
- type: heading
icon: mdi:lightning-bolt
heading: Phase3
heading_style: title
grid_options:
columns: 12
rows: 1
- type: gauge
entity: input_number.source1
name: Voltage
unit: V
max: 270
needle: true
severity:
green: 220
yellow: 0
red: 240
min: 190
- type: gauge
entity: input_number.source1
name: Current
unit: A
max: 20
needle: true
severity:
green: 12
yellow: 14
red: 16
- type: gauge
entity: input_number.source1
name: Power
unit: W
max: 4000
needle: true
severity:
green: 2000
yellow: 3000
red: 3600
- type: grid
cards:
- type: heading
heading: more...
heading_style: title
- type: gauge
entity: input_number.source1
name: Frequency
unit: Hz
min: 45
max: 55
needle: true
- type: gauge
entity: input_number.source1
name: CosPhi
min: 0.9
max: 1.1
needle: true
- type: iframe
url: https://www.home-assistant.io
aspect_ratio: 50%
title: Webpage Device
grid_options:
columns: full
rows: 3
type: sections
max_columns: 4
dense_section_placement: true
cards: []
icon: ''
- title: Catering
sections:
- type: grid
cards:
- type: heading
icon: mdi:sine-wave
heading: RPL16-PM-WD
heading_style: title
column_span: 4
- type: grid
cards:
- type: heading
icon: mdi:lightning-bolt
heading: Phase1
heading_style: title
grid_options:
columns: 12
rows: 1
- type: gauge
entity: input_number.source1
name: Voltage
unit: V
max: 270
needle: true
severity:
green: 220
yellow: 0
red: 240
min: 190
- type: gauge
entity: input_number.source1
name: Current
unit: A
max: 20
needle: true
severity:
green: 12
yellow: 14
red: 16
- type: gauge
entity: input_number.source1
name: Power
unit: W
max: 4000
needle: true
severity:
green: 2000
yellow: 3000
red: 3600
- type: grid
cards:
- type: heading
icon: mdi:lightning-bolt
heading: Phase2
heading_style: title
grid_options:
columns: 12
rows: 1
- type: gauge
entity: input_number.source1
name: Voltage
unit: V
max: 270
needle: true
severity:
green: 220
yellow: 0
red: 240
min: 190
- type: gauge
entity: input_number.source1
name: Current
unit: A
max: 20
needle: true
severity:
green: 12
yellow: 14
red: 16
- type: gauge
entity: input_number.source1
name: Power
unit: W
max: 4000
needle: true
severity:
green: 2000
yellow: 3000
red: 3600
- type: grid
cards:
- type: heading
icon: mdi:lightning-bolt
heading: Phase3
heading_style: title
grid_options:
columns: 12
rows: 1
- type: gauge
entity: input_number.source1
name: Voltage
unit: V
max: 270
needle: true
severity:
green: 220
yellow: 0
red: 240
min: 190
- type: gauge
entity: input_number.source1
name: Current
unit: A
max: 20
needle: true
severity:
green: 12
yellow: 14
red: 16
- type: gauge
entity: input_number.source1
name: Power
unit: W
max: 4000
needle: true
severity:
green: 2000
yellow: 3000
red: 3600
- type: grid
cards:
- type: heading
heading: more...
heading_style: title
- type: gauge
entity: input_number.source1
name: Frequency
unit: Hz
min: 45
max: 55
needle: true
- type: gauge
entity: input_number.source1
name: CosPhi
min: 0.9
max: 1.1
needle: true
- type: iframe
url: https://www.home-assistant.io
aspect_ratio: 50%
title: Webpage Device
grid_options:
columns: full
rows: 3
- type: grid
cards:
- type: heading
heading: Neuer Abschnitt
heading_style: title
grid_options:
columns: full
rows: 3
- type: heading
icon: mdi:sine-wave
heading: RPL32-PM-WD
heading_style: title
column_span: 4
- type: grid
cards:
- type: heading
icon: mdi:lightning-bolt
heading: Phase1
heading_style: title
grid_options:
columns: 12
rows: 1
- type: gauge
entity: input_number.source1
name: Voltage
unit: V
max: 270
needle: true
severity:
green: 220
yellow: 0
red: 240
min: 190
- type: gauge
entity: input_number.source1
name: Current
unit: A
max: 20
needle: true
severity:
green: 12
yellow: 14
red: 16
- type: gauge
entity: input_number.source1
name: Power
unit: W
max: 4000
needle: true
severity:
green: 2000
yellow: 3000
red: 3600
- type: grid
cards:
- type: heading
icon: mdi:lightning-bolt
heading: Phase2
heading_style: title
grid_options:
columns: 12
rows: 1
- type: gauge
entity: input_number.source1
name: Voltage
unit: V
max: 270
needle: true
severity:
green: 220
yellow: 0
red: 240
min: 190
- type: gauge
entity: input_number.source1
name: Current
unit: A
max: 20
needle: true
severity:
green: 12
yellow: 14
red: 16
- type: gauge
entity: input_number.source1
name: Power
unit: W
max: 4000
needle: true
severity:
green: 2000
yellow: 3000
red: 3600
- type: grid
cards:
- type: heading
icon: mdi:lightning-bolt
heading: Phase3
heading_style: title
grid_options:
columns: 12
rows: 1
- type: gauge
entity: input_number.source1
name: Voltage
unit: V
max: 270
needle: true
severity:
green: 220
yellow: 0
red: 240
min: 190
- type: gauge
entity: input_number.source1
name: Current
unit: A
max: 20
needle: true
severity:
green: 12
yellow: 14
red: 16
- type: gauge
entity: input_number.source1
name: Power
unit: W
max: 4000
needle: true
severity:
green: 2000
yellow: 3000
red: 3600
- type: grid
cards:
- type: heading
heading: more...
heading_style: title
- type: gauge
entity: input_number.source1
name: Frequency
unit: Hz
min: 45
max: 55
needle: true
- type: gauge
entity: input_number.source1
name: CosPhi
min: 0.9
max: 1.1
needle: true
- type: iframe
url: https://www.home-assistant.io
aspect_ratio: 50%
title: Webpage Device
grid_options:
columns: full
rows: 3
type: sections
max_columns: 4
dense_section_placement: true
cards: []
icon: ''
- title: Spare
sections:
- type: grid
cards:
- type: heading
icon: mdi:sine-wave
heading: RPL16-PM-WD
heading_style: title
column_span: 4
- type: grid
cards:
- type: heading
icon: mdi:lightning-bolt
heading: Phase1
heading_style: title
grid_options:
columns: 12
rows: 1
- type: gauge
entity: input_number.source1
name: Voltage
unit: V
max: 270
needle: true
severity:
green: 220
yellow: 0
red: 240
min: 190
- type: gauge
entity: input_number.source1
name: Current
unit: A
max: 20
needle: true
severity:
green: 12
yellow: 14
red: 16
- type: gauge
entity: input_number.source1
name: Power
unit: W
max: 4000
needle: true
severity:
green: 2000
yellow: 3000
red: 3600
- type: grid
cards:
- type: heading
icon: mdi:lightning-bolt
heading: Phase2
heading_style: title
grid_options:
columns: 12
rows: 1
- type: gauge
entity: input_number.source1
name: Voltage
unit: V
max: 270
needle: true
severity:
green: 220
yellow: 0
red: 240
min: 190
- type: gauge
entity: input_number.source1
name: Current
unit: A
max: 20
needle: true
severity:
green: 12
yellow: 14
red: 16
- type: gauge
entity: input_number.source1
name: Power
unit: W
max: 4000
needle: true
severity:
green: 2000
yellow: 3000
red: 3600
- type: grid
cards:
- type: heading
icon: mdi:lightning-bolt
heading: Phase3
heading_style: title
grid_options:
columns: 12
rows: 1
- type: gauge
entity: input_number.source1
name: Voltage
unit: V
max: 270
needle: true
severity:
green: 220
yellow: 0
red: 240
min: 190
- type: gauge
entity: input_number.source1
name: Current
unit: A
max: 20
needle: true
severity:
green: 12
yellow: 14
red: 16
- type: gauge
entity: input_number.source1
name: Power
unit: W
max: 4000
needle: true
severity:
green: 2000
yellow: 3000
red: 3600
- type: grid
cards:
- type: heading
heading: more...
heading_style: title
- type: gauge
entity: input_number.source1
name: Frequency
unit: Hz
min: 45
max: 55
needle: true
- type: gauge
entity: input_number.source1
name: CosPhi
min: 0.9
max: 1.1
needle: true
- type: iframe
url: https://www.home-assistant.io
aspect_ratio: 50%
title: Webpage Device
grid_options:
columns: full
rows: 3
- type: grid
cards:
- type: heading
heading: Neuer Abschnitt
heading_style: title
grid_options:
columns: full
rows: 3
- type: heading
icon: mdi:sine-wave
heading: RPL32-PM-WD
heading_style: title
column_span: 4
- type: grid
cards:
- type: heading
icon: mdi:lightning-bolt
heading: Phase1
heading_style: title
grid_options:
columns: 12
rows: 1
- type: gauge
entity: input_number.source1
name: Voltage
unit: V
max: 270
needle: true
severity:
green: 220
yellow: 0
red: 240
min: 190
- type: gauge
entity: input_number.source1
name: Current
unit: A
max: 20
needle: true
severity:
green: 12
yellow: 14
red: 16
- type: gauge
entity: input_number.source1
name: Power
unit: W
max: 4000
needle: true
severity:
green: 2000
yellow: 3000
red: 3600
- type: grid
cards:
- type: heading
icon: mdi:lightning-bolt
heading: Phase2
heading_style: title
grid_options:
columns: 12
rows: 1
- type: gauge
entity: input_number.source1
name: Voltage
unit: V
max: 270
needle: true
severity:
green: 220
yellow: 0
red: 240
min: 190
- type: gauge
entity: input_number.source1
name: Current
unit: A
max: 20
needle: true
severity:
green: 12
yellow: 14
red: 16
- type: gauge
entity: input_number.source1
name: Power
unit: W
max: 4000
needle: true
severity:
green: 2000
yellow: 3000
red: 3600
- type: grid
cards:
- type: heading
icon: mdi:lightning-bolt
heading: Phase3
heading_style: title
grid_options:
columns: 12
rows: 1
- type: gauge
entity: input_number.source1
name: Voltage
unit: V
max: 270
needle: true
severity:
green: 220
yellow: 0
red: 240
min: 190
- type: gauge
entity: input_number.source1
name: Current
unit: A
max: 20
needle: true
severity:
green: 12
yellow: 14
red: 16
- type: gauge
entity: input_number.source1
name: Power
unit: W
max: 4000
needle: true
severity:
green: 2000
yellow: 3000
red: 3600
- type: grid
cards:
- type: heading
heading: more...
heading_style: title
- type: gauge
entity: input_number.source1
name: Frequency
unit: Hz
min: 45
max: 55
needle: true
- type: gauge
entity: input_number.source1
name: CosPhi
min: 0.9
max: 1.1
needle: true
- type: iframe
url: https://www.home-assistant.io
aspect_ratio: 50%
title: Webpage Device
grid_options:
columns: full
rows: 3
type: sections
max_columns: 4
dense_section_placement: true
cards: []
icon: ''
Node-RED Flow anzeigen
Kopiere den Code oder lade ihn herunter:
[
[
{
"id": "282e1eb23067982f",
"type": "tab",
"label": "SHELLY - TO MQTT",
"disabled": false,
"info": "",
"env": []
},
{
"id": "d5cb6ef9109cd2a6",
"type": "tab",
"label": "Rigport SmartVT",
"disabled": false,
"info": "Sample for Rigport SmartVT (Shelly Plus1PM)\r\nBy Johan Nilsson \r\nhttps://gobo.ws",
"env": []
},
{
"id": "0c6a5c2517397221",
"type": "tab",
"label": "Rigport SmartVT Shelly Plus",
"disabled": false,
"info": "Doing some tests / Johan Nilsson - https://gobo.ws",
"env": []
},
{
"id": "ba79df60aca589c4",
"type": "subflow",
"name": "Subflow: MQTT for Shelly",
"info": "",
"category": "",
"in": [],
"out": [],
"env": [
{
"name": "ShellyID",
"type": "str",
"value": "shellyplus1pm-xxxxxxxxxxxx",
"ui": {
"icon": "font-awesome/fa-gear",
"label": {
"en-US": "Shelly ID:"
}
}
},
{
"name": "ShellyStatus",
"type": "env",
"value": "${ShellyID}/status/switch:0",
"ui": {
"type": "hide"
}
},
{
"name": "ShellyOnline",
"type": "env",
"value": "${ShellyID}/online",
"ui": {
"type": "hide"
}
},
{
"name": "ShellyRPC",
"type": "env",
"value": "${ShellyID}/rpc",
"ui": {
"type": "hide"
}
}
],
"meta": {},
"color": "#DDAA99"
},
{
"id": "c37e2bd753a7d1d3",
"type": "tls-config",
"name": "",
"cert": "",
"key": "",
"ca": "",
"certname": "",
"keyname": "",
"caname": "",
"servername": "",
"verifyservercert": false,
"alpnprotocol": ""
},
{
"id": "1b650da9094ecc56",
"type": "ui_base",
"theme": {
"name": "theme-dark",
"lightTheme": {
"default": "#0094CE",
"baseColor": "#0094CE",
"baseFont": "-apple-system,BlinkMacSystemFont,Segoe UI,Roboto,Oxygen-Sans,Ubuntu,Cantarell,Helvetica Neue,sans-serif",
"edited": true,
"reset": false
},
"darkTheme": {
"default": "#097479",
"baseColor": "#097479",
"baseFont": "-apple-system,BlinkMacSystemFont,Segoe UI,Roboto,Oxygen-Sans,Ubuntu,Cantarell,Helvetica Neue,sans-serif",
"edited": true,
"reset": false
},
"customTheme": {
"name": "Untitled Theme 1",
"default": "#4B7930",
"baseColor": "#4B7930",
"baseFont": "-apple-system,BlinkMacSystemFont,Segoe UI,Roboto,Oxygen-Sans,Ubuntu,Cantarell,Helvetica Neue,sans-serif"
},
"themeState": {
"base-color": {
"default": "#097479",
"value": "#097479",
"edited": false
},
"page-titlebar-backgroundColor": {
"value": "#097479",
"edited": false
},
"page-backgroundColor": {
"value": "#111111",
"edited": false
},
"page-sidebar-backgroundColor": {
"value": "#333333",
"edited": false
},
"group-textColor": {
"value": "#0eb8c0",
"edited": false
},
"group-borderColor": {
"value": "#555555",
"edited": false
},
"group-backgroundColor": {
"value": "#333333",
"edited": false
},
"widget-textColor": {
"value": "#eeeeee",
"edited": false
},
"widget-backgroundColor": {
"value": "#097479",
"edited": false
},
"widget-borderColor": {
"value": "#333333",
"edited": false
},
"base-font": {
"value": "-apple-system,BlinkMacSystemFont,Segoe UI,Roboto,Oxygen-Sans,Ubuntu,Cantarell,Helvetica Neue,sans-serif"
}
},
"angularTheme": {
"primary": "indigo",
"accents": "blue",
"warn": "red",
"background": "grey",
"palette": "light"
}
},
"site": {
"name": "Dashboard",
"hideToolbar": "false",
"allowSwipe": "true",
"lockMenu": "true",
"allowTempTheme": "true",
"dateFormat": "DD.MM.YYYY",
"sizes": {
"sx": 48,
"sy": 48,
"gx": 6,
"gy": 6,
"cx": 6,
"cy": 6,
"px": 0,
"py": 0
}
}
},
{
"id": "656301d8ccb653e7",
"type": "ui_tab",
"name": "TEST",
"icon": "dashboard",
"order": 1,
"disabled": false,
"hidden": false
},
{
"id": "4664cc593e454702",
"type": "ui_group",
"name": "Watchdog32",
"tab": "656301d8ccb653e7",
"order": 1,
"disp": true,
"width": "12",
"collapse": true,
"className": ""
},
{
"id": "88feaeb1c229e451",
"type": "ui_group",
"name": "WatchdogL1PM",
"tab": "656301d8ccb653e7",
"order": 3,
"disp": true,
"width": "6",
"collapse": true,
"className": ""
},
{
"id": "8bec5b11cc496664",
"type": "ui_spacer",
"z": "282e1eb23067982f",
"name": "spacer",
"group": "88feaeb1c229e451",
"order": 7,
"width": 6,
"height": 1
},
{
"id": "93c38bd2403fedb8",
"type": "ui_spacer",
"z": "282e1eb23067982f",
"name": "spacer",
"group": "88feaeb1c229e451",
"order": 9,
"width": 6,
"height": 1
},
{
"id": "3ebeae0b74830d2b",
"type": "ui_group",
"name": "Watchdog32PM",
"tab": "656301d8ccb653e7",
"order": 2,
"disp": true,
"width": "12",
"collapse": false,
"className": ""
},
{
"id": "ef49e568bf5c5c27",
"type": "ui_tab",
"name": "Tab 2",
"icon": "dashboard",
"order": 2
},
{
"id": "58433e446c4d7241",
"type": "ui_group",
"name": "Group 4",
"tab": "656301d8ccb653e7",
"order": 4,
"disp": true,
"width": 6
},
{
"id": "064f0a2dc7b285d6",
"type": "ui_spacer",
"z": "282e1eb23067982f",
"name": "spacer",
"group": "4664cc593e454702",
"order": 11,
"width": "1",
"height": "1"
},
{
"id": "3c66d76cb794db8a",
"type": "ui_spacer",
"z": "282e1eb23067982f",
"name": "spacer",
"group": "88feaeb1c229e451",
"order": 4,
"width": 1,
"height": 1
},
{
"id": "8b2a6f2ceb489ed6",
"type": "ui_tab",
"z": "ba79df60aca589c4",
"name": "Test",
"icon": "dashboard",
"disabled": false,
"hidden": true
},
{
"id": "9d5bf5207af0cc05",
"type": "ui_group",
"z": "ba79df60aca589c4",
"name": "Rigport",
"tab": "8b2a6f2ceb489ed6",
"order": 1,
"disp": false,
"width": "6",
"collapse": false,
"className": ""
},
{
"id": "b288429d0f6eacbf",
"type": "mqtt-broker",
"name": "",
"broker": "localhost",
"port": "1883",
"clientid": "",
"autoConnect": true,
"usetls": false,
"protocolVersion": "4",
"keepalive": "60",
"cleansession": true,
"birthTopic": "",
"birthQos": "0",
"birthPayload": "",
"birthMsg": {},
"closeTopic": "",
"closeQos": "0",
"closePayload": "",
"closeMsg": {},
"willTopic": "",
"willQos": "0",
"willPayload": "",
"willMsg": {},
"sessionExpiry": ""
},
{
"id": "47f4c6d21bc8759e",
"type": "ui_tab",
"name": "Rigport",
"icon": "check_circle",
"disabled": false,
"hidden": false
},
{
"id": "c74cb52605407afb",
"type": "mqtt-broker",
"name": "",
"broker": "192.168.1.2",
"port": "1883",
"clientid": "",
"autoConnect": true,
"usetls": false,
"protocolVersion": "4",
"keepalive": "60",
"cleansession": true,
"birthTopic": "",
"birthQos": "0",
"birthPayload": "",
"birthMsg": {},
"closeTopic": "",
"closeQos": "0",
"closePayload": "",
"closeMsg": {},
"willTopic": "",
"willQos": "0",
"willPayload": "",
"willMsg": {},
"sessionExpiry": ""
},
{
"id": "6d8c651d8cf35c03",
"type": "mqtt-broker",
"name": "",
"broker": "mosquitto",
"port": "1883",
"tls": "c37e2bd753a7d1d3",
"clientid": "",
"autoConnect": true,
"usetls": false,
"protocolVersion": "5",
"keepalive": "59",
"cleansession": true,
"birthTopic": "",
"birthQos": "0",
"birthPayload": "",
"birthMsg": {},
"closeTopic": "",
"closeQos": "0",
"closePayload": "",
"closeMsg": {},
"willTopic": "",
"willQos": "0",
"willPayload": "",
"willMsg": {},
"sessionExpiry": ""
},
{
"id": "704d011bba2a9a3c",
"type": "ui_spacer",
"z": "282e1eb23067982f",
"name": "spacer",
"group": "3ebeae0b74830d2b",
"order": 11,
"width": "1",
"height": "1"
},
{
"id": "39c995245f767d26",
"type": "ui_group",
"name": "Rigport",
"tab": "47f4c6d21bc8759e",
"order": 1,
"disp": false,
"width": "7",
"collapse": false,
"className": ""
},
{
"id": "d4dff78e156d66f6",
"type": "ui_tab",
"name": "3Phase-Shelly-Pro3EM",
"icon": "dashboard",
"disabled": false,
"hidden": false
},
{
"id": "2b985b8703f12186",
"type": "ui_group",
"name": "Stage1",
"tab": "d4dff78e156d66f6",
"order": 1,
"disp": true,
"width": 12,
"collapse": true,
"className": ""
},
{
"id": "89efef1ed10ef252",
"type": "ui_text",
"z": "ba79df60aca589c4",
"group": "9d5bf5207af0cc05",
"order": 2,
"width": 0,
"height": 0,
"name": "",
"label": "Device:",
"format": "{{payload.result.sys.device.name}}",
"layout": "row-left",
"className": "",
"x": 640,
"y": 260,
"wires": []
},
{
"id": "716ab991d1bd363b",
"type": "ui_text",
"z": "ba79df60aca589c4",
"group": "9d5bf5207af0cc05",
"order": 10,
"width": 0,
"height": 0,
"name": "",
"label": "Voltage:",
"format": "{{payload.voltage}} V",
"layout": "row-left",
"className": "",
"x": 860,
"y": 200,
"wires": []
},
{
"id": "5734faada2ae567c",
"type": "ui_text",
"z": "ba79df60aca589c4",
"group": "9d5bf5207af0cc05",
"order": 12,
"width": 0,
"height": 0,
"name": "",
"label": "Current:",
"format": "{{payload.params[\"switch:0\"].current}} A (max {{payload.result[\"switch:0\"].current_limit}} A)",
"layout": "row-left",
"className": "",
"x": 640,
"y": 220,
"wires": []
},
{
"id": "ed8a22ea8afd9901",
"type": "ui_text",
"z": "ba79df60aca589c4",
"group": "9d5bf5207af0cc05",
"order": 8,
"width": 0,
"height": 0,
"name": "",
"label": "Internal temperature:",
"format": "{{payload.temperature.tC}} °C",
"layout": "row-left",
"className": "",
"x": 900,
"y": 120,
"wires": []
},
{
"id": "a73d47d9946bc684",
"type": "ui_text",
"z": "ba79df60aca589c4",
"group": "9d5bf5207af0cc05",
"order": 9,
"width": 0,
"height": 0,
"name": "",
"label": "Output is:",
"format": "{{payload.output}}",
"layout": "row-left",
"className": "",
"x": 860,
"y": 160,
"wires": []
},
{
"id": "aa1b32cd79c27fb8",
"type": "mqtt in",
"z": "ba79df60aca589c4",
"name": "",
"topic": "${ShellyStatus}",
"qos": "2",
"datatype": "auto-detect",
"broker": "b288429d0f6eacbf",
"nl": false,
"rap": false,
"inputs": 0,
"x": 300,
"y": 100,
"wires": [
[
"8ced28deb68380b5",
"5734faada2ae567c",
"a0f9b0e880bb7c14",
"1c2a278155b0baf0"
]
]
},
{
"id": "42e3755627f17deb",
"type": "comment",
"z": "ba79df60aca589c4",
"name": "Shelly Plus 1PM",
"info": "",
"x": 300,
"y": 60,
"wires": []
},
{
"id": "db0c02c2ea388fb9",
"type": "ui_text",
"z": "ba79df60aca589c4",
"group": "9d5bf5207af0cc05",
"order": 3,
"width": 0,
"height": 0,
"name": "",
"label": "Online:",
"format": "payload",
"layout": "row-left",
"className": "",
"x": 840,
"y": 300,
"wires": []
},
{
"id": "b6df3fbb39028425",
"type": "mqtt in",
"z": "ba79df60aca589c4",
"name": "",
"topic": "${ShellyOnline}",
"qos": "2",
"datatype": "auto-detect",
"broker": "b288429d0f6eacbf",
"nl": false,
"rap": false,
"inputs": 0,
"x": 300,
"y": 160,
"wires": [
[
"375516fa33a27966"
]
]
},
{
"id": "8ced28deb68380b5",
"type": "change",
"z": "ba79df60aca589c4",
"name": "",
"rules": [
{
"t": "change",
"p": "payload.output",
"pt": "msg",
"from": "true",
"fromt": "bool",
"to": "on",
"tot": "str"
},
{
"t": "change",
"p": "payload.output",
"pt": "msg",
"from": "false",
"fromt": "bool",
"to": "off",
"tot": "str"
}
],
"action": "",
"property": "",
"from": "",
"to": "",
"reg": false,
"x": 660,
"y": 140,
"wires": [
[
"a73d47d9946bc684",
"716ab991d1bd363b",
"ed8a22ea8afd9901"
]
]
},
{
"id": "375516fa33a27966",
"type": "change",
"z": "ba79df60aca589c4",
"name": "",
"rules": [
{
"t": "change",
"p": "payload",
"pt": "msg",
"from": "true",
"fromt": "bool",
"to": "yes",
"tot": "str"
},
{
"t": "change",
"p": "payload",
"pt": "msg",
"from": "false",
"fromt": "bool",
"to": "no",
"tot": "str"
}
],
"action": "",
"property": "",
"from": "",
"to": "",
"reg": false,
"x": 660,
"y": 300,
"wires": [
[
"db0c02c2ea388fb9"
]
]
},
{
"id": "1c2a278155b0baf0",
"type": "ui_text",
"z": "ba79df60aca589c4",
"group": "9d5bf5207af0cc05",
"order": 11,
"width": 0,
"height": 0,
"name": "",
"label": "Power:",
"format": "{{payload.params[\"switch:0\"].current}} W",
"layout": "row-left",
"className": "",
"x": 640,
"y": 100,
"wires": []
},
{
"id": "a0f9b0e880bb7c14",
"type": "ui_gauge",
"z": "ba79df60aca589c4",
"name": "Current",
"group": "9d5bf5207af0cc05",
"order": 13,
"width": "0",
"height": "0",
"gtype": "gage",
"title": "",
"label": "A",
"format": "{{payload.current}}",
"min": "0",
"max": "16",
"colors": [
"#00b500",
"#e6e600",
"#ca3838"
],
"seg1": "",
"seg2": "",
"className": "",
"x": 640,
"y": 180,
"wires": []
},
{
"id": "0674def44152e12f",
"type": "mqtt in",
"z": "ba79df60aca589c4",
"name": "",
"topic": "shelly_config/rpc",
"qos": "2",
"datatype": "auto-detect",
"broker": "b288429d0f6eacbf",
"nl": false,
"rap": false,
"inputs": 0,
"x": 300,
"y": 220,
"wires": [
[
"89efef1ed10ef252",
"5734faada2ae567c"
]
]
},
{
"id": "f56f4425e477d4d0",
"type": "inject",
"z": "ba79df60aca589c4",
"name": "",
"props": [
{
"p": "payload"
},
{
"p": "topic",
"vt": "str"
}
],
"repeat": "5",
"crontab": "",
"once": true,
"onceDelay": 0.1,
"topic": "",
"payload": "{\"id\":1,\"src\":\"shelly_config\",\"method\":\"Shelly.GetConfig\"}",
"payloadType": "json",
"x": 130,
"y": 340,
"wires": [
[
"154708fdafa3307f"
]
]
},
{
"id": "154708fdafa3307f",
"type": "mqtt out",
"z": "ba79df60aca589c4",
"name": "",
"topic": "${ShellyRPC}",
"qos": "2",
"retain": "",
"respTopic": "",
"contentType": "",
"userProps": "",
"correl": "",
"expiry": "",
"broker": "b288429d0f6eacbf",
"x": 300,
"y": 340,
"wires": []
},
{
"id": "e649c8a5aecc6881",
"type": "ui_text",
"z": "ba79df60aca589c4",
"group": "9d5bf5207af0cc05",
"order": 2,
"width": 0,
"height": 0,
"name": "",
"label": "IP:",
"format": "{{payload.result.wifi.sta_ip}}",
"layout": "row-left",
"className": "",
"x": 630,
"y": 340,
"wires": []
},
{
"id": "9c2fd68e8387e0c0",
"type": "mqtt out",
"z": "ba79df60aca589c4",
"name": "",
"topic": "${ShellyRPC}",
"qos": "2",
"retain": "",
"respTopic": "",
"contentType": "",
"userProps": "",
"correl": "",
"expiry": "",
"broker": "b288429d0f6eacbf",
"x": 300,
"y": 400,
"wires": []
},
{
"id": "a45cf5aede486cfe",
"type": "mqtt in",
"z": "ba79df60aca589c4",
"name": "",
"topic": "shelly_status/rpc",
"qos": "2",
"datatype": "auto-detect",
"broker": "b288429d0f6eacbf",
"nl": false,
"rap": false,
"inputs": 0,
"x": 300,
"y": 280,
"wires": [
[
"e649c8a5aecc6881"
]
]
},
{
"id": "507927117a1aad0d",
"type": "inject",
"z": "ba79df60aca589c4",
"name": "",
"props": [
{
"p": "payload"
},
{
"p": "topic",
"vt": "str"
}
],
"repeat": "5",
"crontab": "",
"once": true,
"onceDelay": 0.1,
"topic": "",
"payload": "{\"id\":1,\"src\":\"shelly_status\",\"method\":\"Shelly.GetStatus\"}",
"payloadType": "json",
"x": 130,
"y": 400,
"wires": [
[
"9c2fd68e8387e0c0"
]
]
},
{
"id": "463882bdeea7c715",
"type": "ui_template",
"z": "ba79df60aca589c4",
"group": "9d5bf5207af0cc05",
"name": "",
"order": 1,
"width": 0,
"height": 0,
"format": "\n
\n![\"Rigport\"](\"https://rigport.com/media/image/af/fe/6f/LOGO_2011_2591ecf3a4cfd1.png\")
\n \n",
"storeOutMessages": true,
"fwdInMessages": true,
"resendOnRefresh": true,
"templateScope": "local",
"className": "",
"x": 640,
"y": 60,
"wires": [
[]
]
},
{
"id": "552b2ea562791647",
"type": "mqtt in",
"z": "282e1eb23067982f",
"name": "3EMK1V",
"topic": "shellies/shellyem3-BCFF4DFD1D5F/emeter/0/voltage",
"qos": "2",
"datatype": "auto",
"broker": "6d8c651d8cf35c03",
"nl": false,
"rap": true,
"rh": 0,
"inputs": 0,
"x": 80,
"y": 200,
"wires": [
[
"7b8c7a5d58868114",
"5eeac1602b9a7fac",
"9b58dc3d72bec62a"
]
]
},
{
"id": "7b8c7a5d58868114",
"type": "ui_gauge",
"z": "282e1eb23067982f",
"name": "",
"group": "4664cc593e454702",
"order": 2,
"width": 4,
"height": 3,
"gtype": "gage",
"title": "Spannung 1",
"label": "Volt",
"format": "value",
"min": 0,
"max": "250",
"colors": [
"#ff0000",
"#00ff00",
"#ff0000"
],
"seg1": "229",
"seg2": "230",
"className": "",
"x": 350,
"y": 200,
"wires": []
},
{
"id": "5eeac1602b9a7fac",
"type": "ui_chart",
"z": "282e1eb23067982f",
"name": "",
"group": "4664cc593e454702",
"order": 12,
"width": 0,
"height": 0,
"label": "Spannungsverlauf",
"chartType": "line",
"legend": "false",
"xformat": "HH:mm:ss",
"interpolate": "linear",
"nodata": "",
"dot": false,
"ymin": "",
"ymax": "",
"removeOlder": 1,
"removeOlderPoints": "",
"removeOlderUnit": "3600",
"cutout": 0,
"useOneColor": false,
"useUTC": false,
"colors": [
"#1f77b4",
"#aec7e8",
"#ff7f0e",
"#2ca02c",
"#98df8a",
"#d62728",
"#ff9896",
"#9467bd",
"#c5b0d5"
],
"outputs": 1,
"useDifferentColor": false,
"className": "",
"x": 330,
"y": 320,
"wires": [
[]
]
},
{
"id": "adc2c4fc16e81d2d",
"type": "mqtt in",
"z": "282e1eb23067982f",
"name": "3EMK2V",
"topic": "shellies/shellyem3-BCFF4DFD1D5F/emeter/1/voltage",
"qos": "2",
"datatype": "auto",
"broker": "6d8c651d8cf35c03",
"nl": false,
"rap": true,
"rh": 0,
"inputs": 0,
"x": 80,
"y": 260,
"wires": [
[
"7580994f8a03f321",
"5eeac1602b9a7fac"
]
]
},
{
"id": "c6684455c1a1c8eb",
"type": "mqtt in",
"z": "282e1eb23067982f",
"name": "3EMK3V",
"topic": "shellies/shellyem3-BCFF4DFD1D5F/emeter/2/voltage",
"qos": "2",
"datatype": "auto",
"broker": "6d8c651d8cf35c03",
"nl": false,
"rap": true,
"rh": 0,
"inputs": 0,
"x": 80,
"y": 320,
"wires": [
[
"5eeac1602b9a7fac",
"c242c2d1af7ab29c"
]
]
},
{
"id": "7580994f8a03f321",
"type": "ui_gauge",
"z": "282e1eb23067982f",
"name": "",
"group": "4664cc593e454702",
"order": 3,
"width": 4,
"height": 3,
"gtype": "gage",
"title": "Spannung 2",
"label": "Volt",
"format": "value",
"min": 0,
"max": "250",
"colors": [
"#ff0000",
"#00ff00",
"#ff0000"
],
"seg1": "225",
"seg2": "235",
"className": "",
"x": 350,
"y": 240,
"wires": []
},
{
"id": "c242c2d1af7ab29c",
"type": "ui_gauge",
"z": "282e1eb23067982f",
"name": "",
"group": "4664cc593e454702",
"order": 4,
"width": 4,
"height": 3,
"gtype": "gage",
"title": "Spannung 3",
"label": "Volt",
"format": "value",
"min": 0,
"max": "250",
"colors": [
"#ff0000",
"#00ff00",
"#ff0000"
],
"seg1": "225",
"seg2": "235",
"className": "",
"x": 350,
"y": 280,
"wires": []
},
{
"id": "dd90f1f78e37be26",
"type": "mqtt in",
"z": "282e1eb23067982f",
"name": "2pm",
"topic": "shellies/shellyplus2pm-485519a26ac0/status/switch:1",
"qos": "2",
"datatype": "json",
"broker": "c74cb52605407afb",
"nl": false,
"rap": true,
"rh": 0,
"inputs": 0,
"x": 510,
"y": 480,
"wires": [
[
"295e318c481b49d6",
"484958bda87b494e",
"e209b53592bb83d4",
"7b853ba0eb30059f"
]
]
},
{
"id": "30d448543b63423d",
"type": "ui_gauge",
"z": "282e1eb23067982f",
"name": "",
"group": "88feaeb1c229e451",
"order": 1,
"width": 4,
"height": 3,
"gtype": "gage",
"title": "Spannung",
"label": "Volt",
"format": "value",
"min": 0,
"max": "250",
"colors": [
"#ff0000",
"#00ff00",
"#ff0000"
],
"seg1": "225",
"seg2": "235",
"className": "",
"x": 1030,
"y": 460,
"wires": []
},
{
"id": "6eb623e602e96ca1",
"type": "mqtt in",
"z": "282e1eb23067982f",
"name": "",
"topic": "shellies/shellyem3-C45BBE6AFC49/relay/0",
"qos": "2",
"datatype": "auto",
"broker": "6d8c651d8cf35c03",
"nl": false,
"rap": true,
"rh": 0,
"inputs": 0,
"x": 680,
"y": 80,
"wires": [
[
"a6ad8f78d503f77b"
]
]
},
{
"id": "cad3f255b5283f4e",
"type": "mqtt in",
"z": "282e1eb23067982f",
"name": "1PM-RELAY0-Power",
"topic": "shellies/shellyswitch25-98CDAC2BBB97/relay/0/power",
"qos": "2",
"datatype": "auto",
"broker": "c74cb52605407afb",
"nl": false,
"rap": true,
"rh": 0,
"inputs": 0,
"x": 610,
"y": 560,
"wires": [
[
"ca69e6017d8836bf"
]
]
},
{
"id": "86b6117d55660753",
"type": "mqtt in",
"z": "282e1eb23067982f",
"name": "1PM-RELAY0-Current",
"topic": "shellies/shellyswitch25-98CDAC2BBB97/relay/0/current",
"qos": "2",
"datatype": "auto",
"broker": "6d8c651d8cf35c03",
"nl": false,
"rap": true,
"rh": 0,
"inputs": 0,
"x": 620,
"y": 680,
"wires": [
[
"a55c977b8b55f8b1"
]
]
},
{
"id": "7d749d46417d5458",
"type": "mqtt in",
"z": "282e1eb23067982f",
"name": "1PM-Temperature",
"topic": "shellies/shellyswitch25-98CDAC2BBB97/temperature",
"qos": "2",
"datatype": "auto",
"broker": "6d8c651d8cf35c03",
"nl": false,
"rap": true,
"rh": 0,
"inputs": 0,
"x": 610,
"y": 620,
"wires": [
[
"fab749f325a78108"
]
]
},
{
"id": "fab749f325a78108",
"type": "ui_gauge",
"z": "282e1eb23067982f",
"name": "Temperatur",
"group": "88feaeb1c229e451",
"order": 5,
"width": 4,
"height": 3,
"gtype": "gage",
"title": "Temperature",
"label": "°C",
"format": "value",
"min": "-5",
"max": "60",
"colors": [
"#00b500",
"#e6e600",
"#ca3838"
],
"seg1": "",
"seg2": "",
"className": "",
"x": 810,
"y": 620,
"wires": []
},
{
"id": "ca69e6017d8836bf",
"type": "ui_gauge",
"z": "282e1eb23067982f",
"name": "",
"group": "88feaeb1c229e451",
"order": 2,
"width": 4,
"height": 3,
"gtype": "gage",
"title": "Leistung",
"label": "Watt",
"format": "value",
"min": 0,
"max": "3680",
"colors": [
"#00ff00",
"#00ff00",
"#ff0000"
],
"seg1": "0",
"seg2": "3200",
"className": "",
"x": 1000,
"y": 560,
"wires": []
},
{
"id": "69982d112cdc8e0c",
"type": "ui_gauge",
"z": "282e1eb23067982f",
"name": "",
"group": "4664cc593e454702",
"order": 5,
"width": 4,
"height": 3,
"gtype": "gage",
"title": "Leistung 1",
"label": "Watt",
"format": "value",
"min": 0,
"max": "3680",
"colors": [
"#00ff00",
"#00ff00",
"#ff0000"
],
"seg1": "0",
"seg2": "3200",
"className": "",
"x": 330,
"y": 380,
"wires": []
},
{
"id": "31c7a4fb7ae0e45f",
"type": "ui_gauge",
"z": "282e1eb23067982f",
"name": "",
"group": "4664cc593e454702",
"order": 6,
"width": 4,
"height": 3,
"gtype": "gage",
"title": "Leistung 2",
"label": "Watt",
"format": "value",
"min": 0,
"max": "3680",
"colors": [
"#00ff00",
"#00ff00",
"#ff0000"
],
"seg1": "0",
"seg2": "3200",
"className": "",
"x": 330,
"y": 440,
"wires": []
},
{
"id": "063181c74a135b1d",
"type": "ui_gauge",
"z": "282e1eb23067982f",
"name": "",
"group": "4664cc593e454702",
"order": 7,
"width": 4,
"height": 3,
"gtype": "gage",
"title": "Leistung 3",
"label": "Watt",
"format": "value",
"min": 0,
"max": "3680",
"colors": [
"#00ff00",
"#00ff00",
"#ff0000"
],
"seg1": "0",
"seg2": "3200",
"className": "",
"x": 330,
"y": 500,
"wires": []
},
{
"id": "74a9a75f0b465817",
"type": "mqtt in",
"z": "282e1eb23067982f",
"name": "3EMK1P",
"topic": "shellies/shellyem3-C45BBE6AFC49/emeter/0/power",
"qos": "2",
"datatype": "auto",
"broker": "6d8c651d8cf35c03",
"nl": false,
"rap": true,
"rh": 0,
"inputs": 0,
"x": 80,
"y": 380,
"wires": [
[
"69982d112cdc8e0c"
]
]
},
{
"id": "c684beb91fad9bef",
"type": "mqtt in",
"z": "282e1eb23067982f",
"name": "3EMK2P",
"topic": "shellies/shellyem3-C45BBE6AFC49/emeter/1/power",
"qos": "2",
"datatype": "auto",
"broker": "6d8c651d8cf35c03",
"nl": false,
"rap": true,
"rh": 0,
"inputs": 0,
"x": 80,
"y": 440,
"wires": [
[
"31c7a4fb7ae0e45f"
]
]
},
{
"id": "ceac79402854f3f8",
"type": "mqtt in",
"z": "282e1eb23067982f",
"name": "3EMK3P",
"topic": "shellies/shellyem3-C45BBE6AFC49/emeter/2/power",
"qos": "2",
"datatype": "auto",
"broker": "6d8c651d8cf35c03",
"nl": false,
"rap": true,
"rh": 0,
"inputs": 0,
"x": 80,
"y": 500,
"wires": [
[
"063181c74a135b1d"
]
]
},
{
"id": "a55c977b8b55f8b1",
"type": "ui_gauge",
"z": "282e1eb23067982f",
"name": "",
"group": "88feaeb1c229e451",
"order": 3,
"width": 4,
"height": 3,
"gtype": "gage",
"title": "Strom",
"label": "Ampere",
"format": "value",
"min": 0,
"max": "16",
"colors": [
"#00ff00",
"#00ff00",
"#ff0000"
],
"seg1": "0",
"seg2": "15",
"className": "",
"x": 790,
"y": 680,
"wires": []
},
{
"id": "ae665cc3050f9e42",
"type": "ui_gauge",
"z": "282e1eb23067982f",
"name": "",
"group": "4664cc593e454702",
"order": 8,
"width": 4,
"height": 3,
"gtype": "gage",
"title": "Strom 1",
"label": "Ampere",
"format": "value",
"min": 0,
"max": "32",
"colors": [
"#00ff00",
"#00ff00",
"#ff0000"
],
"seg1": "0",
"seg2": "31",
"className": "",
"x": 320,
"y": 580,
"wires": []
},
{
"id": "1b034a41b19c949b",
"type": "mqtt in",
"z": "282e1eb23067982f",
"name": "3EMK1A",
"topic": "shellies/shellyem3-C45BBE6AFC49/emeter/0/current",
"qos": "2",
"datatype": "auto",
"broker": "6d8c651d8cf35c03",
"nl": false,
"rap": true,
"rh": 0,
"inputs": 0,
"x": 80,
"y": 580,
"wires": [
[
"ae665cc3050f9e42"
]
]
},
{
"id": "bdaa4bf9e2e3343f",
"type": "mqtt in",
"z": "282e1eb23067982f",
"name": "3EMK2A",
"topic": "shellies/shellyem3-C45BBE6AFC49/emeter/1/current",
"qos": "2",
"datatype": "auto",
"broker": "6d8c651d8cf35c03",
"nl": false,
"rap": true,
"rh": 0,
"inputs": 0,
"x": 80,
"y": 640,
"wires": [
[
"8b300704ae1c3b83"
]
]
},
{
"id": "4aa4ed8b33573e09",
"type": "mqtt in",
"z": "282e1eb23067982f",
"name": "3EMK3A",
"topic": "shellies/shellyem3-C45BBE6AFC49/emeter/2/current",
"qos": "2",
"datatype": "auto",
"broker": "6d8c651d8cf35c03",
"nl": false,
"rap": true,
"rh": 0,
"inputs": 0,
"x": 80,
"y": 700,
"wires": [
[
"7c40177f899941ff"
]
]
},
{
"id": "8b300704ae1c3b83",
"type": "ui_gauge",
"z": "282e1eb23067982f",
"name": "",
"group": "4664cc593e454702",
"order": 9,
"width": 4,
"height": 3,
"gtype": "gage",
"title": "Strom 2",
"label": "Ampere",
"format": "value",
"min": 0,
"max": "32",
"colors": [
"#00ff00",
"#00ff00",
"#ff0000"
],
"seg1": "0",
"seg2": "31",
"className": "",
"x": 320,
"y": 640,
"wires": []
},
{
"id": "7c40177f899941ff",
"type": "ui_gauge",
"z": "282e1eb23067982f",
"name": "",
"group": "4664cc593e454702",
"order": 10,
"width": 4,
"height": 3,
"gtype": "gage",
"title": "Strom 3",
"label": "Ampere",
"format": "value",
"min": 0,
"max": "32",
"colors": [
"#00ff00",
"#00ff00",
"#ff0000"
],
"seg1": "0",
"seg2": "31",
"className": "",
"x": 320,
"y": 700,
"wires": []
},
{
"id": "a6ad8f78d503f77b",
"type": "ui_switch",
"z": "282e1eb23067982f",
"name": "",
"label": "Switch",
"tooltip": "",
"group": "4664cc593e454702",
"order": 1,
"width": 0,
"height": 0,
"passthru": true,
"decouple": "false",
"topic": "shellies/shellyem3-C45BBE6AFC49/relay/0/command",
"topicType": "str",
"style": "",
"onvalue": "on",
"onvalueType": "str",
"onicon": "",
"oncolor": "",
"offvalue": "off",
"offvalueType": "str",
"officon": "",
"offcolor": "",
"animate": false,
"className": "",
"x": 950,
"y": 80,
"wires": [
[
"d396945f2048f349"
]
]
},
{
"id": "d396945f2048f349",
"type": "mqtt out",
"z": "282e1eb23067982f",
"name": "",
"topic": "",
"qos": "",
"retain": "",
"respTopic": "",
"contentType": "",
"userProps": "",
"correl": "",
"expiry": "",
"broker": "6d8c651d8cf35c03",
"x": 1130,
"y": 80,
"wires": []
},
{
"id": "4b9d10a83be0a13f",
"type": "mqtt in",
"z": "282e1eb23067982f",
"name": "",
"topic": "shellies/shellyswitch25-98CDAC2BBB97/relay/0",
"qos": "2",
"datatype": "auto",
"broker": "6d8c651d8cf35c03",
"nl": false,
"rap": true,
"rh": 0,
"inputs": 0,
"x": 700,
"y": 140,
"wires": [
[
"2e4f9fe5416c62a9"
]
]
},
{
"id": "d5c72c7c7927961c",
"type": "mqtt in",
"z": "282e1eb23067982f",
"name": "",
"topic": "shellies/shellyswitch25-98CDAC2BBB97/relay/1",
"qos": "2",
"datatype": "auto",
"broker": "6d8c651d8cf35c03",
"nl": false,
"rap": true,
"rh": 0,
"inputs": 0,
"x": 700,
"y": 180,
"wires": [
[
"017786a374dda9cc"
]
]
},
{
"id": "2e4f9fe5416c62a9",
"type": "ui_switch",
"z": "282e1eb23067982f",
"name": "",
"label": "Switch",
"tooltip": "",
"group": "88feaeb1c229e451",
"order": 6,
"width": 2,
"height": 1,
"passthru": true,
"decouple": "false",
"topic": "shellies/shellyplus2pm-485519a23e5c/relay/0/command",
"topicType": "str",
"style": "",
"onvalue": "on",
"onvalueType": "str",
"onicon": "",
"oncolor": "",
"offvalue": "off",
"offvalueType": "str",
"officon": "",
"offcolor": "",
"animate": false,
"className": "",
"x": 950,
"y": 140,
"wires": [
[
"d396945f2048f349"
]
]
},
{
"id": "017786a374dda9cc",
"type": "ui_switch",
"z": "282e1eb23067982f",
"name": "",
"label": "Switch",
"tooltip": "",
"group": "88feaeb1c229e451",
"order": 8,
"width": 2,
"height": 1,
"passthru": true,
"decouple": "false",
"topic": "shellies/shellyplus2pm-485519a23e5c/relay/1/command",
"topicType": "str",
"style": "",
"onvalue": "on",
"onvalueType": "str",
"onicon": "",
"oncolor": "",
"offvalue": "off",
"offvalueType": "str",
"officon": "",
"offcolor": "",
"animate": false,
"className": "",
"x": 950,
"y": 180,
"wires": [
[
"d396945f2048f349"
]
]
},
{
"id": "1b1a0200eeaa60fc",
"type": "mqtt in",
"z": "282e1eb23067982f",
"name": "3EMK1V",
"topic": "shellies/shellyem3-BCFF4DFD1D5F/emeter/0/voltage",
"qos": "2",
"datatype": "auto",
"broker": "6d8c651d8cf35c03",
"nl": false,
"rap": true,
"rh": 0,
"inputs": 0,
"x": 80,
"y": 1000,
"wires": [
[
"531cc83a38c5ef4c",
"3972bf9ca5218d6f"
]
]
},
{
"id": "531cc83a38c5ef4c",
"type": "ui_gauge",
"z": "282e1eb23067982f",
"name": "",
"group": "3ebeae0b74830d2b",
"order": 2,
"width": 4,
"height": 3,
"gtype": "gage",
"title": "Spannung 21",
"label": "Volt",
"format": "value",
"min": 0,
"max": "400",
"colors": [
"#ff0000",
"#00ff00",
"#ff0000"
],
"seg1": "220",
"seg2": "240",
"className": "",
"x": 350,
"y": 1000,
"wires": []
},
{
"id": "3972bf9ca5218d6f",
"type": "ui_chart",
"z": "282e1eb23067982f",
"name": "",
"group": "3ebeae0b74830d2b",
"order": 12,
"width": 0,
"height": 0,
"label": "Spannungsverlauf 21",
"chartType": "line",
"legend": "false",
"xformat": "HH:mm:ss",
"interpolate": "linear",
"nodata": "",
"dot": false,
"ymin": "",
"ymax": "",
"removeOlder": 1,
"removeOlderPoints": "",
"removeOlderUnit": "3600",
"cutout": 0,
"useOneColor": false,
"useUTC": false,
"colors": [
"#1f77b4",
"#aec7e8",
"#ff7f0e",
"#2ca02c",
"#98df8a",
"#d62728",
"#ff9896",
"#9467bd",
"#c5b0d5"
],
"outputs": 1,
"useDifferentColor": false,
"className": "",
"x": 340,
"y": 1120,
"wires": [
[]
]
},
{
"id": "7ffcf6442bac421f",
"type": "mqtt in",
"z": "282e1eb23067982f",
"name": "3EMK2V",
"topic": "shellies/shellyem3-BCFF4DFD1D5F/emeter/1/voltage",
"qos": "2",
"datatype": "auto",
"broker": "6d8c651d8cf35c03",
"nl": false,
"rap": true,
"rh": 0,
"inputs": 0,
"x": 80,
"y": 1060,
"wires": [
[
"5e5f3b8803767c12",
"3972bf9ca5218d6f"
]
]
},
{
"id": "992f4e024f0341a0",
"type": "mqtt in",
"z": "282e1eb23067982f",
"name": "3EMK3V",
"topic": "shellies/shellyem3-BCFF4DFD1D5F/emeter/2/voltage",
"qos": "2",
"datatype": "auto",
"broker": "6d8c651d8cf35c03",
"nl": false,
"rap": true,
"rh": 0,
"inputs": 0,
"x": 80,
"y": 1120,
"wires": [
[
"3972bf9ca5218d6f",
"fc4cc7c41094b56f"
]
]
},
{
"id": "5e5f3b8803767c12",
"type": "ui_gauge",
"z": "282e1eb23067982f",
"name": "",
"group": "3ebeae0b74830d2b",
"order": 3,
"width": 4,
"height": 3,
"gtype": "gage",
"title": "Spannung 22",
"label": "Volt",
"format": "value",
"min": 0,
"max": "400",
"colors": [
"#ff0000",
"#00ff00",
"#ff0000"
],
"seg1": "225",
"seg2": "235",
"className": "",
"x": 350,
"y": 1040,
"wires": []
},
{
"id": "fc4cc7c41094b56f",
"type": "ui_gauge",
"z": "282e1eb23067982f",
"name": "",
"group": "3ebeae0b74830d2b",
"order": 4,
"width": 4,
"height": 3,
"gtype": "gage",
"title": "Spannung 23",
"label": "Volt",
"format": "value",
"min": 0,
"max": "400",
"colors": [
"#ff0000",
"#00ff00",
"#ff0000"
],
"seg1": "225",
"seg2": "235",
"className": "",
"x": 350,
"y": 1080,
"wires": []
},
{
"id": "f9cb279511168f6b",
"type": "ui_gauge",
"z": "282e1eb23067982f",
"name": "",
"group": "3ebeae0b74830d2b",
"order": 5,
"width": 4,
"height": 3,
"gtype": "gage",
"title": "Leistung 21",
"label": "Watt",
"format": "value",
"min": 0,
"max": "3680",
"colors": [
"#00ff00",
"#00ff00",
"#ff0000"
],
"seg1": "0",
"seg2": "3200",
"className": "",
"x": 330,
"y": 1180,
"wires": []
},
{
"id": "c74c70619d122de3",
"type": "ui_gauge",
"z": "282e1eb23067982f",
"name": "",
"group": "3ebeae0b74830d2b",
"order": 6,
"width": 4,
"height": 3,
"gtype": "gage",
"title": "Leistung 22",
"label": "Watt",
"format": "value",
"min": 0,
"max": "3680",
"colors": [
"#00ff00",
"#00ff00",
"#ff0000"
],
"seg1": "0",
"seg2": "3200",
"className": "",
"x": 330,
"y": 1240,
"wires": []
},
{
"id": "8e5df0be39ee1a8e",
"type": "ui_gauge",
"z": "282e1eb23067982f",
"name": "",
"group": "3ebeae0b74830d2b",
"order": 7,
"width": 4,
"height": 3,
"gtype": "gage",
"title": "Leistung 23",
"label": "Watt",
"format": "value",
"min": 0,
"max": "3680",
"colors": [
"#00ff00",
"#00ff00",
"#ff0000"
],
"seg1": "0",
"seg2": "3200",
"className": "",
"x": 330,
"y": 1300,
"wires": []
},
{
"id": "f82b9ca901f9d8e9",
"type": "mqtt in",
"z": "282e1eb23067982f",
"name": "3EMK1P",
"topic": "shellies/shellyem3-BCFF4DFD1D5F/emeter/0/power",
"qos": "2",
"datatype": "auto",
"broker": "6d8c651d8cf35c03",
"nl": false,
"rap": true,
"rh": 0,
"inputs": 0,
"x": 80,
"y": 1180,
"wires": [
[
"f9cb279511168f6b"
]
]
},
{
"id": "2feedd920b69265e",
"type": "mqtt in",
"z": "282e1eb23067982f",
"name": "3EMK2P",
"topic": "shellies/shellyem3-BCFF4DFD1D5F/emeter/1/power",
"qos": "2",
"datatype": "auto",
"broker": "6d8c651d8cf35c03",
"nl": false,
"rap": true,
"rh": 0,
"inputs": 0,
"x": 80,
"y": 1240,
"wires": [
[
"c74c70619d122de3"
]
]
},
{
"id": "94ebf0ff0db4987e",
"type": "mqtt in",
"z": "282e1eb23067982f",
"name": "3EMK3P",
"topic": "shellies/shellyem3-BCFF4DFD1D5F/emeter/2/power",
"qos": "2",
"datatype": "auto",
"broker": "6d8c651d8cf35c03",
"nl": false,
"rap": true,
"rh": 0,
"inputs": 0,
"x": 80,
"y": 1300,
"wires": [
[
"8e5df0be39ee1a8e"
]
]
},
{
"id": "da3f078f717e6347",
"type": "ui_gauge",
"z": "282e1eb23067982f",
"name": "",
"group": "3ebeae0b74830d2b",
"order": 8,
"width": 4,
"height": 3,
"gtype": "gage",
"title": "Strom 21",
"label": "Ampere",
"format": "value",
"min": 0,
"max": "32",
"colors": [
"#00ff00",
"#00ff00",
"#ff0000"
],
"seg1": "0",
"seg2": "31",
"className": "",
"x": 320,
"y": 1380,
"wires": []
},
{
"id": "b39ec893d909157d",
"type": "mqtt in",
"z": "282e1eb23067982f",
"name": "3EMK1A",
"topic": "shellies/shellyem3-BCFF4DFD1D5F/emeter/0/current",
"qos": "2",
"datatype": "auto",
"broker": "6d8c651d8cf35c03",
"nl": false,
"rap": true,
"rh": 0,
"inputs": 0,
"x": 80,
"y": 1380,
"wires": [
[
"da3f078f717e6347"
]
]
},
{
"id": "f3ef3a62d5b342b4",
"type": "mqtt in",
"z": "282e1eb23067982f",
"name": "3EMK2A",
"topic": "shellies/shellyem3-BCFF4DFD1D5F/emeter/1/current",
"qos": "2",
"datatype": "auto",
"broker": "6d8c651d8cf35c03",
"nl": false,
"rap": true,
"rh": 0,
"inputs": 0,
"x": 80,
"y": 1440,
"wires": [
[
"5109dc24ba19276e"
]
]
},
{
"id": "5a84d7672e8ad857",
"type": "mqtt in",
"z": "282e1eb23067982f",
"name": "3EMK3A",
"topic": "shellies/shellyem3-BCFF4DFD1D5F/emeter/2/current",
"qos": "2",
"datatype": "auto",
"broker": "6d8c651d8cf35c03",
"nl": false,
"rap": true,
"rh": 0,
"inputs": 0,
"x": 80,
"y": 1500,
"wires": [
[
"71d81e9c50d1b6c5"
]
]
},
{
"id": "5109dc24ba19276e",
"type": "ui_gauge",
"z": "282e1eb23067982f",
"name": "",
"group": "3ebeae0b74830d2b",
"order": 9,
"width": 4,
"height": 3,
"gtype": "gage",
"title": "Strom 22",
"label": "Ampere",
"format": "value",
"min": 0,
"max": "32",
"colors": [
"#00ff00",
"#00ff00",
"#ff0000"
],
"seg1": "0",
"seg2": "31",
"className": "",
"x": 320,
"y": 1440,
"wires": []
},
{
"id": "71d81e9c50d1b6c5",
"type": "ui_gauge",
"z": "282e1eb23067982f",
"name": "",
"group": "3ebeae0b74830d2b",
"order": 10,
"width": 4,
"height": 3,
"gtype": "gage",
"title": "Strom 23",
"label": "Ampere",
"format": "value",
"min": 0,
"max": "32",
"colors": [
"#00ff00",
"#00ff00",
"#ff0000"
],
"seg1": "0",
"seg2": "31",
"className": "",
"x": 320,
"y": 1500,
"wires": []
},
{
"id": "e78d484ab6f2df3e",
"type": "mqtt in",
"z": "282e1eb23067982f",
"name": "",
"topic": "shellies/shellyem3-BCFF4DFD1D5F/relay/0",
"qos": "2",
"datatype": "auto",
"broker": "6d8c651d8cf35c03",
"nl": false,
"rap": true,
"rh": 0,
"inputs": 0,
"x": 690,
"y": 240,
"wires": [
[
"e1324a65cabb051e"
]
]
},
{
"id": "e1324a65cabb051e",
"type": "ui_switch",
"z": "282e1eb23067982f",
"name": "",
"label": "Switch",
"tooltip": "",
"group": "3ebeae0b74830d2b",
"order": 1,
"width": 0,
"height": 0,
"passthru": true,
"decouple": "false",
"topic": "shellies/shellyem3-BCFF4DFD1D5F/relay/0/command",
"topicType": "str",
"style": "",
"onvalue": "on",
"onvalueType": "str",
"onicon": "",
"oncolor": "",
"offvalue": "off",
"offvalueType": "str",
"officon": "",
"offcolor": "",
"animate": false,
"className": "",
"x": 950,
"y": 240,
"wires": [
[
"d396945f2048f349"
]
]
},
{
"id": "295e318c481b49d6",
"type": "function",
"z": "282e1eb23067982f",
"name": "",
"func": "\nreturn msg;",
"outputs": 1,
"noerr": 0,
"initialize": "",
"finalize": "",
"libs": [],
"x": 680,
"y": 460,
"wires": [
[
"30d448543b63423d",
"ca69e6017d8836bf"
]
]
},
{
"id": "484958bda87b494e",
"type": "json",
"z": "282e1eb23067982f",
"name": "",
"property": "payload",
"action": "",
"pretty": true,
"x": 690,
"y": 500,
"wires": [
[]
]
},
{
"id": "e209b53592bb83d4",
"type": "split",
"z": "282e1eb23067982f",
"name": "",
"splt": "\\11",
"spltType": "str",
"arraySplt": "",
"arraySpltType": "len",
"stream": true,
"addname": "topic",
"property": "payload",
"x": 570,
"y": 340,
"wires": [
[
"d9ad90615b1822cd"
]
]
},
{
"id": "d9ad90615b1822cd",
"type": "debug",
"z": "282e1eb23067982f",
"name": "",
"active": true,
"tosidebar": true,
"console": false,
"tostatus": false,
"complete": "payload",
"targetType": "msg",
"statusVal": "",
"statusType": "auto",
"x": 1010,
"y": 380,
"wires": []
},
{
"id": "9b58dc3d72bec62a",
"type": "debug",
"z": "282e1eb23067982f",
"name": "",
"active": true,
"tosidebar": true,
"console": true,
"tostatus": false,
"complete": "payload",
"targetType": "msg",
"statusVal": "",
"statusType": "auto",
"x": 840,
"y": 320,
"wires": []
},
{
"id": "b206931212c9ba41",
"type": "ui_template",
"z": "282e1eb23067982f",
"group": "39c995245f767d26",
"name": "",
"order": 1,
"width": 0,
"height": 0,
"format": "\n
\n\n \n",
"storeOutMessages": true,
"fwdInMessages": true,
"resendOnRefresh": true,
"templateScope": "local",
"className": "",
"x": 760,
"y": 1620,
"wires": [
[]
]
},
{
"id": "5e92c41cdc4e9b2b",
"type": "ui_text",
"z": "282e1eb23067982f",
"group": "39c995245f767d26",
"order": 2,
"width": 0,
"height": 0,
"name": "",
"label": "Device:",
"format": "{{payload.result.sys.device.name}}",
"layout": "row-left",
"className": "",
"x": 760,
"y": 1820,
"wires": []
},
{
"id": "6e7e9b85d046b540",
"type": "ui_text",
"z": "282e1eb23067982f",
"group": "39c995245f767d26",
"order": 10,
"width": 0,
"height": 0,
"name": "",
"label": "Voltage:",
"format": "{{payload.voltage}} V",
"layout": "row-left",
"className": "",
"x": 1000,
"y": 1760,
"wires": []
},
{
"id": "89f04b864333b4b3",
"type": "ui_text",
"z": "282e1eb23067982f",
"group": "39c995245f767d26",
"order": 12,
"width": 0,
"height": 0,
"name": "",
"label": "Current:",
"format": "{{payload.params[\"switch:0\"].current}} A (max {{payload.result[\"switch:0\"].current_limit}} A)",
"layout": "row-left",
"className": "",
"x": 760,
"y": 1780,
"wires": []
},
{
"id": "edcad0f8a850717a",
"type": "ui_text",
"z": "282e1eb23067982f",
"group": "39c995245f767d26",
"order": 8,
"width": 0,
"height": 0,
"name": "",
"label": "Internal temperature:",
"format": "{{payload.temperature.tC}} °C",
"layout": "row-left",
"className": "",
"x": 1040,
"y": 1680,
"wires": []
},
{
"id": "d0f9bc2ce0814001",
"type": "ui_text",
"z": "282e1eb23067982f",
"group": "39c995245f767d26",
"order": 9,
"width": 0,
"height": 0,
"name": "",
"label": "Output is:",
"format": "{{payload.output}}",
"layout": "row-left",
"className": "",
"x": 1000,
"y": 1720,
"wires": []
},
{
"id": "a44b8f6d55802b81",
"type": "mqtt in",
"z": "282e1eb23067982f",
"name": "2pm",
"topic": "shellies/shellyplus2pm-485519a23e5c/status/switch:1",
"qos": "2",
"datatype": "json",
"broker": "c74cb52605407afb",
"nl": false,
"rap": false,
"inputs": 0,
"x": 270,
"y": 1700,
"wires": [
[
"667ac0045e10842a",
"89f04b864333b4b3",
"f98530c6a1d89485",
"6e64c832e4904bf2"
]
]
},
{
"id": "1081f4ed435c0177",
"type": "comment",
"z": "282e1eb23067982f",
"name": "Shelly Plus 1PM",
"info": "",
"x": 300,
"y": 1660,
"wires": []
},
{
"id": "bf496ce8eb60dd1c",
"type": "ui_text",
"z": "282e1eb23067982f",
"group": "39c995245f767d26",
"order": 3,
"width": 0,
"height": 0,
"name": "",
"label": "Online:",
"format": "payload",
"layout": "row-left",
"className": "",
"x": 940,
"y": 1860,
"wires": []
},
{
"id": "a2d1de87f54dbd3b",
"type": "mqtt in",
"z": "282e1eb23067982f",
"name": "",
"topic": "shellyplus1pm-08b61fd790ac/online",
"qos": "2",
"datatype": "auto-detect",
"broker": "b288429d0f6eacbf",
"nl": false,
"rap": false,
"inputs": 0,
"x": 360,
"y": 1760,
"wires": [
[
"3a02df900e55bba7"
]
]
},
{
"id": "667ac0045e10842a",
"type": "change",
"z": "282e1eb23067982f",
"name": "",
"rules": [
{
"t": "change",
"p": "payload.output",
"pt": "msg",
"from": "true",
"fromt": "bool",
"to": "on",
"tot": "str"
},
{
"t": "change",
"p": "payload.output",
"pt": "msg",
"from": "false",
"fromt": "bool",
"to": "off",
"tot": "str"
}
],
"action": "",
"property": "",
"from": "",
"to": "",
"reg": false,
"x": 780,
"y": 1700,
"wires": [
[
"d0f9bc2ce0814001",
"6e7e9b85d046b540",
"edcad0f8a850717a"
]
]
},
{
"id": "3a02df900e55bba7",
"type": "change",
"z": "282e1eb23067982f",
"name": "",
"rules": [
{
"t": "change",
"p": "payload",
"pt": "msg",
"from": "true",
"fromt": "bool",
"to": "yes",
"tot": "str"
},
{
"t": "change",
"p": "payload",
"pt": "msg",
"from": "false",
"fromt": "bool",
"to": "no",
"tot": "str"
}
],
"action": "",
"property": "",
"from": "",
"to": "",
"reg": false,
"x": 780,
"y": 1860,
"wires": [
[
"bf496ce8eb60dd1c"
]
]
},
{
"id": "6e64c832e4904bf2",
"type": "ui_text",
"z": "282e1eb23067982f",
"group": "39c995245f767d26",
"order": 11,
"width": 0,
"height": 0,
"name": "",
"label": "Power:",
"format": "{{payload.params[\"switch:0\"].current}} W",
"layout": "row-left",
"className": "",
"x": 760,
"y": 1660,
"wires": []
},
{
"id": "f98530c6a1d89485",
"type": "ui_gauge",
"z": "282e1eb23067982f",
"name": "Current",
"group": "39c995245f767d26",
"order": 13,
"width": "0",
"height": "0",
"gtype": "gage",
"title": "",
"label": "A",
"format": "{{payload.current}}",
"min": "0",
"max": "16",
"colors": [
"#00b500",
"#e6e600",
"#ca3838"
],
"seg1": "",
"seg2": "",
"className": "",
"x": 760,
"y": 1740,
"wires": []
},
{
"id": "7f9a435567ec3afd",
"type": "mqtt in",
"z": "282e1eb23067982f",
"name": "",
"topic": "shelly_config/rpc",
"qos": "2",
"datatype": "auto-detect",
"broker": "b288429d0f6eacbf",
"nl": false,
"rap": false,
"inputs": 0,
"x": 300,
"y": 1820,
"wires": [
[
"5e92c41cdc4e9b2b",
"89f04b864333b4b3"
]
]
},
{
"id": "3c6ff0dab44e75b1",
"type": "inject",
"z": "282e1eb23067982f",
"name": "",
"props": [
{
"p": "payload"
},
{
"p": "topic",
"vt": "str"
}
],
"repeat": "5",
"crontab": "",
"once": true,
"onceDelay": 0.1,
"topic": "",
"payload": "{\"id\":1,\"src\":\"shelly_config\",\"method\":\"Shelly.GetConfig\"}",
"payloadType": "json",
"x": 130,
"y": 1940,
"wires": [
[
"d89f50380044fb36"
]
]
},
{
"id": "d89f50380044fb36",
"type": "mqtt out",
"z": "282e1eb23067982f",
"name": "",
"topic": "shellyplus1pm-08b61fd790ac/rpc",
"qos": "2",
"retain": "",
"respTopic": "",
"contentType": "",
"userProps": "",
"correl": "",
"expiry": "",
"broker": "b288429d0f6eacbf",
"x": 360,
"y": 1940,
"wires": []
},
{
"id": "7fe913e62aeef3b9",
"type": "ui_text",
"z": "282e1eb23067982f",
"group": "39c995245f767d26",
"order": 2,
"width": 0,
"height": 0,
"name": "",
"label": "IP:",
"format": "{{payload.result.wifi.sta_ip}}",
"layout": "row-left",
"className": "",
"x": 750,
"y": 1900,
"wires": []
},
{
"id": "42dba11d19fc5df5",
"type": "mqtt out",
"z": "282e1eb23067982f",
"name": "",
"topic": "shellyplus1pm-08b61fd790ac/rpc",
"qos": "2",
"retain": "",
"respTopic": "",
"contentType": "",
"userProps": "",
"correl": "",
"expiry": "",
"broker": "b288429d0f6eacbf",
"x": 360,
"y": 2000,
"wires": []
},
{
"id": "3f10955140b0a7c7",
"type": "mqtt in",
"z": "282e1eb23067982f",
"name": "",
"topic": "shelly_status/rpc",
"qos": "2",
"datatype": "auto-detect",
"broker": "b288429d0f6eacbf",
"nl": false,
"rap": false,
"inputs": 0,
"x": 300,
"y": 1880,
"wires": [
[
"7fe913e62aeef3b9"
]
]
},
{
"id": "2cb6091322316e2f",
"type": "inject",
"z": "282e1eb23067982f",
"name": "",
"props": [
{
"p": "payload"
},
{
"p": "topic",
"vt": "str"
}
],
"repeat": "5",
"crontab": "",
"once": true,
"onceDelay": 0.1,
"topic": "",
"payload": "{\"id\":1,\"src\":\"shelly_status\",\"method\":\"Shelly.GetStatus\"}",
"payloadType": "json",
"x": 130,
"y": 2000,
"wires": [
[
"42dba11d19fc5df5"
]
]
},
{
"id": "7b853ba0eb30059f",
"type": "debug",
"z": "282e1eb23067982f",
"name": "",
"active": true,
"tosidebar": true,
"console": false,
"tostatus": false,
"complete": "payload",
"targetType": "msg",
"statusVal": "",
"statusType": "auto",
"x": 730,
"y": 400,
"wires": []
},
{
"id": "45ce379f05ebe825",
"type": "subflow:ba79df60aca589c4",
"z": "d5cb6ef9109cd2a6",
"name": "Enter your ShellyID in the field below.",
"env": [
{
"name": "ShellyID",
"value": "shellyplus2pm-485519a23e5c",
"type": "str"
}
],
"x": 215,
"y": 180,
"wires": [],
"icon": "node-red/cog.svg",
"l": false
},
{
"id": "7dbc8cf2b85ae1ce",
"type": "comment",
"z": "d5cb6ef9109cd2a6",
"name": "Setup:",
"info": "",
"x": 230,
"y": 140,
"wires": [],
"icon": "font-awesome/fa-arrow-down"
},
{
"id": "90ae8f884229162f",
"type": "function",
"z": "0c6a5c2517397221",
"name": "Phase A",
"func": "msg.topic = \"Phase A\";\nmsg.payload = msg.payload.em0.a_voltage;\nreturn msg;",
"outputs": 1,
"timeout": "",
"noerr": 0,
"initialize": "",
"finalize": "",
"libs": [],
"x": 360,
"y": 140,
"wires": [
[
"8e885d6f2bf69f03",
"b9f50a8f47f73107"
]
]
},
{
"id": "49cfbaefbfc214db",
"type": "function",
"z": "0c6a5c2517397221",
"name": "Phase B",
"func": "msg.topic = \"Phase B\";\nmsg.payload = msg.payload.em0.b_voltage;\nreturn msg;",
"outputs": 1,
"timeout": "",
"noerr": 0,
"initialize": "",
"finalize": "",
"libs": [],
"x": 360,
"y": 180,
"wires": [
[
"8e885d6f2bf69f03",
"a459a7c62f206d39"
]
]
},
{
"id": "413b204d0f5263df",
"type": "function",
"z": "0c6a5c2517397221",
"name": "Phase C",
"func": "msg.topic = \"Phase C\";\nmsg.payload = msg.payload.em0.c_voltage;\nreturn msg;",
"outputs": 1,
"timeout": "",
"noerr": 0,
"initialize": "",
"finalize": "",
"libs": [],
"x": 360,
"y": 220,
"wires": [
[
"8e885d6f2bf69f03",
"1116dcb6b023d72b"
]
]
},
{
"id": "8e885d6f2bf69f03",
"type": "ui_chart",
"z": "0c6a5c2517397221",
"name": "Three-Phase Voltage Chart",
"group": "2b985b8703f12186",
"order": 4,
"width": 12,
"height": 6,
"label": "3-Phasen-Spannung",
"chartType": "line",
"legend": "true",
"xformat": "HH:mm:ss",
"interpolate": "linear",
"nodata": "",
"dot": false,
"ymin": "200",
"ymax": "250",
"removeOlder": 1,
"removeOlderPoints": "",
"removeOlderUnit": "3600",
"cutout": 0,
"useOneColor": false,
"useUTC": false,
"colors": [
"#1f77b4",
"#ff7f0e",
"#2ca02c",
"#d62728",
"#9467bd",
"#8c564b",
"#e377c2",
"#7f7f7f",
"#bcbd22"
],
"outputs": 1,
"useDifferentColor": false,
"className": "",
"x": 1020,
"y": 180,
"wires": [
[]
]
},
{
"id": "ef502f5b1bfb63d5",
"type": "shelly-gen2",
"z": "0c6a5c2517397221",
"hostname": "192.168.1.80",
"description": "WD32",
"mode": "polling",
"verbose": false,
"server": "",
"outputmode": "event",
"uploadretryinterval": 5000,
"pollinginterval": 5000,
"pollstatus": true,
"getstatusoncommand": true,
"devicetype": "Measure",
"devicetypemustmatchexactly": false,
"captureblutooth": false,
"outputs": 1,
"x": 110,
"y": 140,
"wires": [
[
"fc0434e607d2243b",
"90ae8f884229162f",
"49cfbaefbfc214db",
"413b204d0f5263df"
]
]
},
{
"id": "fc0434e607d2243b",
"type": "debug",
"z": "0c6a5c2517397221",
"name": "debug 1",
"active": true,
"tosidebar": true,
"console": false,
"tostatus": false,
"complete": "payload",
"targetType": "msg",
"statusVal": "",
"statusType": "auto",
"x": 260,
"y": 100,
"wires": []
},
{
"id": "b9f50a8f47f73107",
"type": "ui_gauge",
"z": "0c6a5c2517397221",
"name": "Spannug L1",
"group": "2b985b8703f12186",
"order": 1,
"width": 4,
"height": 4,
"gtype": "gage",
"title": "L1",
"label": "Volt",
"format": "value",
"min": "220",
"max": "250",
"colors": [
"#e6e600",
"#00e600",
"#e6e600"
],
"seg1": "220",
"seg2": "240",
"className": "",
"x": 970,
"y": 220,
"wires": []
},
{
"id": "a459a7c62f206d39",
"type": "ui_gauge",
"z": "0c6a5c2517397221",
"name": "Spannug L2",
"group": "2b985b8703f12186",
"order": 2,
"width": 4,
"height": 4,
"gtype": "gage",
"title": "L2",
"label": "Volt",
"format": "value",
"min": "220",
"max": "250",
"colors": [
"#e6e600",
"#00e600",
"#e6e600"
],
"seg1": "220",
"seg2": "240",
"className": "",
"x": 970,
"y": 260,
"wires": []
},
{
"id": "1116dcb6b023d72b",
"type": "ui_gauge",
"z": "0c6a5c2517397221",
"name": "Spannug L3",
"group": "2b985b8703f12186",
"order": 3,
"width": 4,
"height": 4,
"gtype": "gage",
"title": "L3",
"label": "Volt",
"format": "value",
"min": "220",
"max": "250",
"colors": [
"#e6e600",
"#00e600",
"#e6e600"
],
"seg1": "220",
"seg2": "240",
"className": "",
"x": 970,
"y": 300,
"wires": []
},
{
"id": "42733928acb13d9d",
"type": "function",
"z": "0c6a5c2517397221",
"name": "Phase A",
"func": "msg.topic = \"Phase A\";\nmsg.payload = msg.payload.em0.a_current;\nreturn msg;",
"outputs": 1,
"timeout": "",
"noerr": 0,
"initialize": "",
"finalize": "",
"libs": [],
"x": 350,
"y": 360,
"wires": [
[
"c63ed9f89c4f35e5",
"fa3e8959aa9145ba"
]
]
},
{
"id": "ac8dfc3305a35dc8",
"type": "function",
"z": "0c6a5c2517397221",
"name": "Phase B",
"func": "msg.topic = \"Phase B\";\nmsg.payload = msg.payload.em0.b_current;\nreturn msg;",
"outputs": 1,
"timeout": "",
"noerr": 0,
"initialize": "",
"finalize": "",
"libs": [],
"x": 350,
"y": 400,
"wires": [
[
"c63ed9f89c4f35e5",
"723c01360cd4af9c"
]
]
},
{
"id": "5129b18666ab5ad5",
"type": "function",
"z": "0c6a5c2517397221",
"name": "Phase C",
"func": "msg.topic = \"Phase C\";\nmsg.payload = msg.payload.em0.c_current;\nreturn msg;",
"outputs": 1,
"timeout": "",
"noerr": 0,
"initialize": "",
"finalize": "",
"libs": [],
"x": 350,
"y": 440,
"wires": [
[
"c63ed9f89c4f35e5",
"c8f04bb256529565"
]
]
},
{
"id": "c63ed9f89c4f35e5",
"type": "ui_chart",
"z": "0c6a5c2517397221",
"name": "Three-Phase Current Chart",
"group": "2b985b8703f12186",
"order": 8,
"width": 0,
"height": 0,
"label": "3-Phasen-Strom",
"chartType": "line",
"legend": "true",
"xformat": "HH:mm:ss",
"interpolate": "linear",
"nodata": "",
"dot": false,
"ymin": "0",
"ymax": "16",
"removeOlder": 1,
"removeOlderPoints": "",
"removeOlderUnit": "3600",
"cutout": 0,
"useOneColor": false,
"useUTC": false,
"colors": [
"#1f77b4",
"#ff7f0e",
"#2ca02c",
"#d62728",
"#9467bd",
"#8c564b",
"#e377c2",
"#7f7f7f",
"#bcbd22"
],
"outputs": 1,
"useDifferentColor": false,
"className": "",
"x": 1070,
"y": 400,
"wires": [
[]
]
},
{
"id": "fa3e8959aa9145ba",
"type": "ui_gauge",
"z": "0c6a5c2517397221",
"name": "Strom L1",
"group": "2b985b8703f12186",
"order": 5,
"width": 4,
"height": 4,
"gtype": "gage",
"title": "L1",
"label": "Ampere",
"format": "value",
"min": "0",
"max": "16",
"colors": [
"#00e600",
"#e6e600",
"#e60000"
],
"seg1": "8",
"seg2": "12",
"className": "",
"x": 960,
"y": 440,
"wires": []
},
{
"id": "723c01360cd4af9c",
"type": "ui_gauge",
"z": "0c6a5c2517397221",
"name": "Strom L1",
"group": "2b985b8703f12186",
"order": 6,
"width": 4,
"height": 4,
"gtype": "gage",
"title": "L1",
"label": "Ampere",
"format": "value",
"min": "0",
"max": "16",
"colors": [
"#00e600",
"#e6e600",
"#e60000"
],
"seg1": "8",
"seg2": "12",
"className": "",
"x": 960,
"y": 480,
"wires": []
},
{
"id": "c8f04bb256529565",
"type": "ui_gauge",
"z": "0c6a5c2517397221",
"name": "Strom L1",
"group": "2b985b8703f12186",
"order": 7,
"width": 4,
"height": 4,
"gtype": "gage",
"title": "L1",
"label": "Ampere",
"format": "value",
"min": "0",
"max": "16",
"colors": [
"#00e600",
"#e6e600",
"#e60000"
],
"seg1": "8",
"seg2": "12",
"className": "",
"x": 960,
"y": 520,
"wires": []
}
]
]
